iWave’s “iW-Rainbow-G27S” Pico-ITX SBC runs Linux or Android on an i.MX8 QuadPlus or QuadMax with up to 8GB LPDDR4, 2x GbE, 2x USB 3.0, 802.11ac/BT, M.2, HDMI in and out, and -40 to 85°C support. [via] The i.MX8 Quad MAX/Quad Plus Pico ITX SBC integrates Dual Cortex A72 + Quad Cortex A53 Cores, Dual GPU […]
IW-RAINBOW-G27S – I.MX8 QUAD MAX/QUAD PLUS PICO ITX SBC Read More »
The STM32Fo30 is one of the most popular microcontrollers in the STM32 family. It’s relative low-power specification and high-resolution ADCs fetched it good followership among designers, as such, it was quite interesting to hear that Czechia-based electronics specialist and Tindie user, NiceThings, announced the launch of a new development board based on it, called the PINKY32. The board was
PINKY32 – THE TINY STM32F030 DEVELOPMENT BOARD YOU ALWAYS WANTED Read More »
Arduino based electric board controlling system, Can be controlled using any universal IR remote. good IR receiving range and support 12 CH. Supplies 1) Soldering Iron 2) Solder wire 3) plier 4) multimeter 5) solder flux 6) wires 7) battery 8) connectors 10) wick for desolder Step 1: Introduction Hello guys, today we are going
CES 2020 has been full of the usual intrigue and amazing display of technological advancements across different industries. As usual, it has featured the release/launch of several new products by different companies and one of such announcements we know will interest the community, is the launch of the Arduino Portenta Family of Boards, with the
AAEON’s UP project has launched an edge computing enabled kit called the UPX Edge. The system which was developed to power industrial automation, robotics, AI, and IoT applications, is built around the Intel 8th Gen Whiskey Lake-U based UP Xtreme board and comes preloaded with an Ubuntu 18.04 image based on Linux kernel 5.0 It was initially available on Kickstarter
UP XTREME SBC RELAUNCHES ALONG WITH UPX EDGE SYSTEM BASED ON IT Read More »
Thanks to a host of useful feather wings and shields, the Adafruit Feather form factor is becoming a very popular one with a host of other boards now based on it, offering not only the shape and size but also pin compatibility to allow the use feather addons like the FeatherWings and shields. In line with this, Arturo (@Arturo182) recently announced
THE I.MX RT FAMILY MAKES FOR SOME FEATURE FILLED FEATHERS! Read More »
[Neumi] over on Hackaday.IO wanted a simple-to-use way to drive stepper motors, which could be quickly deployed in a wide variety of applications yet to be determined. The solution is named Ethersweep, and is a small PCB stack that sits on the rear of the common NEMA17-format stepper motor. The only physical connectivity, beside the motor,
ETHERSWEEP: AN EASY-TO-DEPLOY ETHERNET CONNECTED STEPPER CONTROLLER Read More »
Radxa has officially launched the Rock Pi N10, a sandwich-style 100 x 100mm board based around the Rockchip RK3399Pro SoC. This community-backed board has a new flavor of RK3399 that adds up to 3-TOPS NPU co-processor for better performance in deep-learning workloads. The new Rock Pi N10 has a maximum RAM allotment beyond the RK3399’s 4GB limit so it can provide
ROCK PI N10 FROM RADXA IS POWERED BY RK3999PRO AND INTEGRATED NEURAL PROCESSING UNIT Read More »
iWave Systems introduces a powerful SOM (System on Module) with six heterogeneous ARM processor cores (four 64-bit ARM Cortex-A53 and two 32-bit ARM Cortex-R5 Cores), an ARM Mali-400 MP2 GPU, and a big chunk of the latest-generation UltraScale+ programmable logic cells scaling all the way to 1 million. Designed a ZU19EG / ZU17EG / ZU11EG Zynq
Lenovo has recently ventured into the community-backed SBC market, flagging off with a Rockchip-based board. They follow suit with fellow PC makers Asus. Their flagship Leez P710 boasts a more powerful, hexa-core Cortex-A72 and -A53 Rockchip RK3399 than that of the Asus Tinker Board’s RK3288. The Leez P710 was announced last February at Mobile World Congress and has been launched on AliExpress for $141.
