Hobbyists, electronic enthusiasts and makers may be interested in a new 4 channel relay board aptly named the RelayFi. The 4 channel smart relay board is powered by a ESP32 WROOM providing the ability to safely control up to four appliances or devices on a load of 110-250 VAC/7A, 30 VDC/10A depending on your needs. If you are interested in […]
RelayFi ESP32-WROOM 4 channel relay board Continue Reading
Texas Instruments’ 24-bit, 32 kSPS ADC is optimized for cost-sensitive applications that require simultaneous sampling Texas Instruments’ ADS131M08 8-channel, simultaneously-sampling, 24-bit ΔΣ ADC offers wide dynamic range, low power, and energy-measurement-specific features. These features make the device ideal for energy metering, power metrology, and circuit breaker applications. The ADC inputs can be directly interfaced with a resistor-divider
ADS131M08 8-CHANNEL SIMULTANEOUS SAMPLING DELTA-SIGMA (ΔΣ) ADC Continue Reading
The PicoScope 6000E series brings very high speed performance to an 8 analog channel, 16 digital channel oscilloscope with 5GSa/s sampling and 4GSa deep memory. Saelig Company, Inc. has introduced the PicoScope 6000E Series 8-channel 500MHz Oscilloscopes, which provide 8 to 12 bits of vertical resolution, 5GSa/s sampling rate, and 4GSa memory, allowing these scopes to
PICOSCOPE 6000E 8-CHANNEL 500MHZ MIXED-SIGNAL OSCILLOSCOPES Continue Reading
Rohde & Schwarz released the R&S NGP800 family of power supplies, which include two and four channel models. Channels can be operated fully independently or synchronized, and features include a 5” high-resolution touch screen, which also displays detailed statistics. The devices offer voltages up to 250V, currents up to 80A, and power up to 800W. Each channel
In this, I will tell you how to connect two 16*2 LCDs together with a single Arduino. This is a very unique project. you can’t find this anywhere. Description Introduction In this project, I will tell you that how to connect two LCDs together with the help of Arduino only. When I was starting this
How to connect two 16×2 LCD together with arduino Continue Reading
Acromag adds another military-grade measurement and control module to its AcroPack series of ruggedized mini PCIe I/O modules. The new AP730 multi-function I/O module performs analog input, analog output, discrete I/O and counter/timer functions. A variety of carrier cards can host up to four modules and are available in PCIe, VPX, XMC, CompactPCI-Serial, and mini-ITX
ACROMAG COMBINES A/D, D/A, DIGITAL I/O AND COUNTER/TIMER CHANNELS ON ACROPACK Continue Reading
Infineon Technologies AG broadens its EiceDRIVER™ portfolio with the 650 V half-bridge gate drivers based on Infineon’s unique silicon on insulator (SOI) technology. The products provide leading negative transient voltage immunity, monolithic integration of a real bootstrap diode, and superior latch-up immunity for MOSFET and IGBT based inverter applications. These unique features enable more robust and reliable designs
Melexis’ MLX90374 monolithic magnetic position processor IC enables the design of non-contacting position sensors in automotive and industrial applications Melexis’ MLX90374, a Triaxis® family position sensor, offers stray field robustness featuring two output drivers, high operating voltage, and temperature operation. The MLX90374 is a monolithic magnetic position processor IC. It consists of a Triaxis Hall magnetic front end, an
MLX90374 POSITION SENSOR Continue Reading
Programmable, low-noise, three-channel power supplies that deliver up to 375W in a compact 2U high, half-rack-wide enclosure have been introduced by Tektronix. The Keithley Series 2230G is designed for maximum flexibility, accuracy, and low noise when testing high power, multi-voltage circuits such as LED drivers, automotive, and power-IC circuits. The power supplies’ three channels are isolated,
THREE-CHANNEL POWER SUPPLIES DELIVER UP TO 375W Continue Reading
Thanks to their high accuracy and fast load recovery time, the R&S®NGM200 power supplies are perfect for challenging applications. Their two-quadrant architecture allows them to function both as a source and a sink to simulate batteries and loads. Their short recovery times enable them to handle fast load changes that occur, for example, when mobile communications devices
R&S®NGM200 POWER SUPPLY SERIES ARE TOP CLASS PSUS Continue Reading
