INTRODUCTION This manual will show you how to use each of the components in the kit, and give you software Sketch examples for each one. Then you can combine some components to make examples of Automatic Systems such as a lighting controller. You’re probably here because you’re interested in MAKING things with Arduino. The […]
LEARN! ARDUINO – A HANDS-ON APPROACH Continue Reading
I don’t get up at the same time every day, so I thought it’d be nice to have an alarm clock that would drag me out of bed at different times on different days. That was the initial idea: things got out of hand, of course, and this is the result. What it does: 1)
Alarm Clock Overkill Using Arduino Continue Reading
I’ve had a cuecat barcode scanner sitting around for over 10 years. Basically it connects to a PS2 port (apparently there is a USB version) like a keyboard and spits out a barcode when scanned. Nice!. The annoying thing is that it is “encrypted”. What I set out to do is; – unencrypt the barcode
Arduino and CueCat barcode scanner Continue Reading
In this introduction I will show you a overview of this project whit Arduino Uno. The purpose of this instructable is move a electric roller shutter by Arduino Uno. The prototype that I made is my first electronic project with Arduino and I hope this instructable and the solutions that I found are useful for
Domotic Arduino Continue Reading
This has been done before. There are several good ways to do it: most use either a 555 timer chip and decimal counter chip, or an Arduino. Stefan and I used an Arduino (Boarduino, technically) which limited our scanner to 14 LEDs. No problem — 14 gives a nice scanning effect! Here’s how we wired
Cylon Pumpkin Using Arduino Continue Reading
QR codes are addicting. Smartphones are smart enough to read them from virtually any angle or orientation. But imagine taking it a step further. I had dreams of a digital LED array that I could program with QR codes, and I wanted it really big! I used 16 matrices to create the QR code that
Build Your Own Programmable LED Matrix Continue Reading
During the past spring a good friend of mine bought me my first house plant, a Lady Palm, and I’ve found myself rather invested in keeping it alive. To that end I wanted to monitor the plant’s environment so I could ensure that its needs were being met. My first thought was another ITP project,
Botanicalls Clone using an Arduino Continue Reading
A “fan cart” is a roughly constant-force device used in introductory physics labs. It consists of a fan (usually a model airplane propeller on a brushed DC motor) mounted on top of a low-friction cart. Students use it to pretend they’re learning something about force, acceleration, energy, etc. If you’ve ever taken an introductory physics
Arduino-Controlled Physics Lab Fan-Cart Continue Reading
This device captures the IP address of your network and it publish on site DynDNS.com. All without PC. It allow a remote access to your LAN even if the IP address of the connections changes. For logistics reasons the provider can not assign a IP fixed for all users, so many users, especially private, work
Arduino DDNS (Dynamic DNS) by Open-Electronics.org Continue Reading
Once you’re getting some values from sensors, for example using Arduino, (see my previous instructable), sometimes it’s nice to see the sensor data in a graph. Here’s how in only a few steps! I made this particular Instructables using a sonar sensor (XL Max Sonar EZ/AE) but you can do it with any data values
Visualize data from sensors using Arduino + coolterm Continue Reading
