This project will guide you through the steps to make an Arduino based 360 degree rotating foam ball turret with full joystick wireless control, and first person view camera and headset. This is a moderately complex project for hobbyists looking to try something a little extra. Parts of this project were limited by component availability […]
Arduino NERF Ball Wireless FPV Sentry Turret Continue Reading
Hello everybody hope you’re doing well, in this instructable I’m going to show you how to make a wireless motion alarm system, this device consists of a transmitter and a receiver. So essentially it is a pretty simple and basic wireless motion alarm system with light indication. Besides being fairly useful it is also a
DIY Arduino Wireless Motion Alarm System Continue Reading
I hope you will find this Instructable interesting and useful. It is only three (3) steps long, plus an introduction. If you do find this article helpful, even if it is relative to when you see it some months or years old, please be kind enough to mouse click “Favorited” at the top of this
Simple Inexpensive Wireless With Any IR Remote, Including No Longer Used Ones Continue Reading
This utility GUI application is a tool for visualizing the content of multiple data streams passed as short numeric messages back and forth across the network via a MQTT server. It supports opening an authenticated connection to the server, subscribing to a class of messages in order to receive them, viewing message traffic, and plotting
Arduino MQTT Plotter (PyQt5) Continue Reading
This PyQt5-Enabled Arduino MQTT GUI connects an Arduino sketch to a remote MQTT server over the network. It communicates with the Arduino using the serial port, relaying lines of text to and from the MQTT server. This can be used as a platform for remote Arduino to Arduino collaboration. The application is provided all in
Arduino-MQTT Bridge (PyQt5) Continue Reading
A New Kind of InstrumentI invented Kravox during a research project at Lund University (Sweden) with the aim to give digital musical instrument controllers the feeling of conventional, mechanical instruments. Now I want to make Kravox accessible as a musical experimentation platform for everyone, so I created this detailed Instructable to enable as many people
Spatial Synthesizer Kravox! Wireless, Motion- & Touch-Sensing Continue Reading
Dear friends welcome to another Instructable! Today we are going to learn how to get the data that this Xiaomi Temperature and Humidity monitor transmits using the Bluetooth functionality of the ESP32 board. As you can see, I am using an ESP32 board and a 2.8” color TFT display. On the display, we display the temperature and
ESP32 Xiaomi Hack – Get Data Wirelessly Continue Reading
In this instructable we’ll be making some centrally controlled wireless RGB lamps, that responds to music and sounds in the environment! In addition to instructions, the instructable contains: Schematics List of components Link to the code so you can make and modify your own project Step 1: Planning Ahead Here are the major components I
Wireless Music Reactive Floor Lamps Continue Reading
The problem that fix this project is the following: at the high school where I work, the class-change bell doesn´t sound loud enough everywhere and sometimes it causes some problems. Install a new wired class-change bells or buy a wireless bell system isn´t possible by the moment. This project could be useful too, for everybody
Wireless Bell System Continue Reading
In this DIY guide I will show you how to make your own wireless weather station! My communication protocol will allow you to have up to 10 sensor stations in your wireless network, but you can change and extend it up to 254 stations! The RF technology and the module that we used will allow
Arduino Based Wireless (RF) Weather Station Network Continue Reading
