The project TiDiGino We developed a new GSM remote control called TiDiGino. The name recalls the initials (TDGxx) of our previous GSM remote control and is also based on the Arduino project. All the details of this circuit can be found below, but no the sketch, because this is your assignment. The contestYou have to write the firmware for this project. The device must perform all the functions […]
TiDiGino Contest using arduino Continue Reading
Part 1 – Test Circuit and Test Code Introduction Getting your Arduino to transmit via the radio initially may seem daunting but its actually pretty simple. Please freely substitute the word “Arduino” for any micro-controller you wish to use. The example below works for 5V and 3.3V micro-controllers. Please read this : This may be
Linking an Arduino to a Radiometrix NTX2B Transmitter Continue Reading
I was going to make a huge write-up on this, but I can’t be bothered right now. I’ll probably do something about it later. Until then, have an Arduino sketch. If you don’t know what you’re doing with it then chances are you don’t have an Arduino, in which case the file is useless to
Xbox 360 RF module + Arduino Continue Reading
To see how RFM12B wireless compares to other similar wireless options (e.g Xbee, XRF etc..) check out this well compiled comparison overview by Stuart Poulton: http://blog.homelabs.org.uk/wireless-connectivity/. Overview Made by Hope RF, re-branded by RFsolutions in the UK. Sometimes called ‘Alpha RF’ Low cost RF transceiver (from Rapid, Farnell, or RS in the UK) Up to 300m transmission Up
RFM12B – Part 1 – Hardware Overview Continue Reading
