To all other teens (I’m 16) who have begun to pick up an intrest in robotics and electronics the following project will give you a great user-system to get started with. This is not for complete beginers, but after only 6 months of teaching myself to code and develop robotics I have developed T.A.B.U. What […]
Introduction: T.A.B.U. A Robot using Arduino Continue Reading
The Android phone that stays in your hand most of the time is useful in many other applications apart from Whatsapp, Facebook; appliances; monitor your health parameters. How it would be if it can control a Robot, which can assist in your daily work. With this project you can make a robot that can be
Android Phone Controlled Robot using Arduino Continue Reading
The Million Dollar Furby: We can rebuild him. We have the technology. Continued from the previous Instructable where we excised Furby’s primitive brain , it’s now time to replace it with something greater. This Instructable will detail how to install a new microcontroller in place of Furby’s old brain, making him into a fully controllable
Control a Furby with Arduino (or other microcontroller) Continue Reading
Steps On the breadboard, build two bi-directional motor control circuits (also known as “H-bridge”) circuits. These circuits will control the two DC motors that drive the wheels. Each circuit will have two wires from the Arduino (one for forward, one for backward) to control the circuit, and two wires from the single DC motor that
Arduino MicroBot Project Continue Reading
Our first Arduino robot called Rolly in our February issue proved to be a popular project. Powered by an Arduino Uno board it was easy to put together and cost very little. In this project we upped the ante again with our first walking robot appropriately called Stompy. He’s a quadruped a four-legged walker and
Arduino Project 8: Stompy the robot (part 1) Continue Reading
Hi folks, Here’s an interesting project for all you creative minds out there. We are going to build an android phone controlled RC car. Nothing could be more fascinating than remote controlled cars. This one uses Bluetooth for communication and accelerometer of the mobile device for gesture control. The reason behind the use of a
Gesture control car(robot) with Arduino and Android(bluetooth) Continue Reading
This machine, a variation on the hanging-pen plotter is a conspicuous and wilfully naive attempt to break out of the pristine, pixel perfect, colour-corrected space that exists inside our computers. It’s a drawing machine, that takes a pen (a human tool) and uses it to draw in a singularly robotic way, with some grand results.
Polargraph Drawing Machine Continue Reading
Sneel is the name of my snake / eel swimming robot. This is documentation of hardware, software and mechanical design of Sneel_003. urethane flex tubing, microcontrollers, Zigbee wireless radio, hose clamps, wires, servo motors, titanium servo brackets, silicon, marine grease, epoxy, pond pump Sneel is a swimming robotic water-snake, constructed to explore lifelike, sinuous motion
Make a swimming Robo-Snake Using Arduino Continue Reading
For years I have been telling anyone who listens that I was going to build a robotic drum. Most people kind of shrugged indifferently. Even as I built it, most people kind of glanced over at it and conveyed doubtfulness. It seemed like no one but myself was convinced of just how awesome it was
Arduino-Controlled Robotic Drum Continue Reading
You are never to old to learn and try new things. I think one of the best days in my life was the day I discovered the Instructables web site. It opened up a whole new world to me. This is my third instructable . I really enjoy building anything that I can ride on
