f you’ve ever wanted the ability to use some form of hardware-based authentication in your projects then this is the board to do it with. The Parallax RFID (Radio Frequency Identification) reader is super easy to configure. It only takes four wires! It uses serial protocol to transfer information from RFID cards to the Arduino.
Using the Parallax RFID Reader with an Arduino Continue Reading
3D AIR mouse | Arduino + Processing I’m an Industrial design student, and last year as part of a course called “Technology as RAW materiel” I built this project as my final work. I work most of the time with SolidWorks, a CAD software for design and engenering. Rotating a solid body on the screen
3D AIR mouse | Arduino + Processing Continue Reading
What it is… Type: Graphical (128×64) monochrome LCD with LED backlight Interface: Serial / SPI This is a good time to read the datasheet Available from: Adafruit, of course! Introduction: This mini-tutorial will go through the process of setting up a ST7565 LCD. These LCDs are graphical which means they can display pixels, not just
ST7565 LCDs: Graphical LCDs Continue Reading
This is an instructable for the Interactive LED Lab Coats, showcased at Autodesk University. Check out the videos below! The first is a demo of the colors actuated by the buttons. The second is a demo of the breathalyzer! (this will be explained later) Tools Sewing machine Soldering iron Wire cutters & strippers Hobby knife
Interactive LED Lab Coat using Arduino Continue Reading
The key to my apartment never worked quite right because it is a copy of a copy of a copy. I am fairly certain that the dead bolt is original to the building and the property manager seems to have lost the original key years ago. As a result unlocking the door was always a
Keyfob Deadbolt using an Arduino Board Continue Reading
This instructable shows you how to use NES controller in Atari 2600 or ZX Spectrum (with Kempston Interface) with the aid of an Arduino. Step 1: Background talk I have recently acquired a couple of Atari 2600s and a bunch of joysticks. Both consoles were working but all of the 5 joysticks were damaged beyond repair. Indeed,
Arduino lets you play Atari 2600 and ZX Spectrum using a NES controller Continue Reading
*NOTE* THIS PROJECT IS DONE BY A GROUP OF STUDENTS FROM SINGAPORE POLYTECHNIC. Telemetry – Solar Cells Our project is using Arduino with the ZigBee to transmit and receive data from the solar cell. Data will be shown in the LCD and the software called “X-CTU”. Components used: 1 Arduino Uno 1 ZigBee Shield (Transmitter)
Telemetry with solar cell using an Arduino Continue Reading
If you’re like me, after I got my Arduino and performed a final programming on my first chip, I wanted to pull it off my Arduino Duemilanove and put it on my own circuit. This would also free up my Arduino for future projects. The problem was that I’m such an electronics newbie that I didn’t know
Standalone Arduino chip on breadboard Continue Reading
In this introduction I will show you a overview of this project whit Arduino Uno. The purpose of this instructable is move a electric roller shutter by Arduino Uno. The prototype that I made is my first electronic project with Arduino and I hope this instructable and the solutions that I found are useful for
Domotic Arduino Continue Reading
This project is a relatively straightforward and simple DIY music board. The Dot Matrix Board will allow any aged person to create their own music and beats. All you need to have is an understanding of Arduino and circuitry. Step 1: Gather Parts Needed Step 2: Assemble the Board To begin building the board on
Arduino Controlled RGB LED Dot Matrix Board Continue Reading
