Have you ever wanted to make a project that involved contact-less sensing? For example: to detect a door closing, to count the number of revolutions of a wheel, or make a speedometer? Then this Arduino Hall Effect sensor tutorial is for you! This project uses a Hall Effect sensor to detect the presence of a […]
A Simple Guide to Using a Hall Effect Sensor With Arduino Continue Reading
In this post, I will be reviewing a few basic IMU (Inertia Measurement Unit) sensors that are compatible Arduino. I will also give a short tutorial for interfacing an Arduino with the best IMU sensor available. IMU sensors like the MPU 6050 are used in self-balancing robots, UAVs, smartphones, and more. IMU sensors are one
IMU Interfacing Tutorial Get started with Arduino and the MPU 6050 Sensor Continue Reading
Making cool things with an Arduino is something, but making musical instruments out of an Arduino is something else! So behold, here comes the Musical-duino, an Arduino keyboard. To see what this does, check out the demo video at the bottom of this page. They say that “You can become anyone”, so why not become Beethoven
DIY Music Keyboard: How to Make Sounds With Arduino Continue Reading
Ever wondered how to bring an Arduino board into your daily life? We often adjust the display brightness of our mobile phones to suit to our need. With this project, you can do that for your bedside lamps or any other lighting at home. We are going to teach you how to make an Arduino
How to Make an Arduino Powered Lamp Dimmer Continue Reading
One of the simplest projects you can make for your first time using an Arduino is an obstacle avoiding robot. If you are a beginner to Arduino and want to learn more about it, this Arduino robot tutorial will teach you the basics while you build a cool robot. This project will give you a
How to Make Your First Robot Using Arduino Continue Reading
When you make a project using Arduino, it usually contains a lot of jumper connections on the breadboard and the project will not be a permanent one. If you want to make any other project using that Arduino, you will have to remove all the connections made on it and to rebuild the same project, you need to start over again.
How to Shrink Your Arduino Projects: Making a Permanent Circuit Board Continue Reading
Here is a simple project using an Arduino and some LEDs. What we are going to learn here today is how to make a POV display or Persistence-Of-Vision display. It is made out of just 6$ worth of components. This tutorial gives will teach you how to make a simple and a cheap Arduino POV
How to Make a POV Display Using LEDs and Arduino Continue Reading
A simple project to display cool 8bit art and animation on your backpack! This is a quick and easy project you could finish off in minutes and show off to your friends. What it does is, when you move your backpack, a dot matrix display turns on and shows any character you have programmed in it.
How to Make a 8bit Dot Matrix Display Using Arduino Continue Reading
A range finder is a device used to find the distance from a point to the nearest obstacle. This device uses ultrasonic technology to measure the distance. You can consider it like an electronic, hassle-free version of a measuring tape with a measuring range of 2cm to 400cm and an accuracy of 1cm. Typical applications
Interfacing: How to Make an Arduino Uno UltraSonic Range Finder! Continue Reading
Ever thought of controlling any of your electronic devices with your smart phone? How about a robot or any other device? Wouldn’t it be cool to control them with your smartphone? Here is a simple tutorial for interfacing an Android Smartphone with Arduino via Bluetooth! Required Materials Hardware Bluetooth Module HC 05/06 Arduino & Battery (with
Bluetooth Basics: How to Control an LED Using a SmartPhone and Arduino Continue Reading
