One quick fore note: this is my first Instructable and my first large Arduino project, so if you see any stupid errors or have an idea of how things could be done better, then please let me know. Now that that’s out of the way I’ll begin, I started designing this around September last year as my A2 […]
Interactive Arduino Powered Coffee Table Continue Reading
In this instructable, I will show you how to make a simple Simon Says Game using an Arduino. it’s not just simple but we can get a psychological benefit. I have a bad memory to remember something fast or a new things. So this project really suitable for someone like me. hahaha We’re gonna using
Arduino – Simple Simon Says Game Continue Reading
There are more than 20 models of LEGO®’s Dune Buggy type car, even more than the models in LEGO® Race Car category. Dune Buggy is usually four wheels drive off road vehicle, which would not be used on the road. Now that I got excited on the “dune buggy”, and was also inspired by 1998 LEGO®’s Turbo
R/C LEGO® “The Bull” Buggy Continue Reading
Don’t worry! First, this is a rebuild out of a movie so it won’t explode for real and it won’t be worn by a real wolf. However there is fursuiting for which I am a big fan of and my own character (fursona) is a wolf and lives in a world of technology and total
Track-and-explode wolf collar… Continue Reading
Create your own Super Bright LED-lined sneakers that blink with multiple patterns. 1.0 FEATURES: – 1 color LEDs – 6 patterns – reed sensors + magnets that give you control to step through patterns – detachable velcro design – small, wearable microcontroller + power Step 1: Parts & Tools Parts: Super Bright LEDs (35 or
Super Brite LED Sneakers 1.0 using an Arduino Continue Reading
In this Instructable I’ll show you how to make a electronic dashboard for a bicycle. We’ll be using an Arduino and a few off-the-shelf parts to create a system with light control and an LED speedometer. Step 1: Materials Arduino Micro (RadioShack #: 276-258) 12V 10W halogen bulb (RadioShack #: 272-011) (2x) 12V lamp (RadioShack
Bike Dashboard Continue Reading
In this Instructable I will be giving you step-by-step instructions on how to interface The Arduino, A Motor Controller (L293D), and a laptop to make a Wifi controlled rover you can drive around your house or work from anywhere in the world. I started and made this project for my Gr.11 Computer Engineering class, it
Game maker Rover using an Arduino Continue Reading
How to make an “analog” input device from fabric and a few other necessary materials. “Analog” in parenthesis because, although it is made up of 4 analog inputs, the only analog transition between the directions (up, right, down and left) comes from the buffering material (in this case 3cm thick squishy packing material) that absorbs
Analog Fabric Joypad using an Arduino Continue Reading
Want to play Pong on your computer with your Esplora? This example shows you how. This example is designed to be used with a Processing sketch. Processing is an open source programming environment. The Esplora reads the slider and buttons and sends data to the Processing sketch serially over USB, and Processing uses the incoming
Arduino Esplora Pong Continue Reading
When you flip a switch, the coffin lid opens and a smiling red eyed ghost arises. The ghost flings some candy, pushes the switch back and returns to rest. Then, the coffin lid closes. Step 1: Major parts include: 4.5 rpm motor #155821 Jameco.com 1.8 rpm motor #176050 Jameco.com Two shaft couplers #162270 Jameco.com Servo
Candy Tossin Coffin using an Arduino Continue Reading
