News & Updates

CO2 temperature and humidity monitor

CO2, temperature and humidity monitor

CO2 Monitoring is mandatory in many workplaces and it affects two of my clients directly in Barrel Halls where wine is stored and aged in temperature and environmentally controlled areas. The table below shows the affects of various concentrations in the air. 250-350ppm Normal background concentration in outdoor ambient air 350-1,000ppm Concentrations typical of occupied indoor

CO2, temperature and humidity monitor Continue Reading

Adding manual shutter speeds to Yashica Electro 35 series cameras using Ardiuno

How to build a simple Arduino shutter speed tester – by Ethan Moses

I’ve been stuck in my house filling orders for my Kickstarter campaign for the CAMERADACTYL 4×5 Field Camera, mostly just babysitting printers, changing filaments and adjusting extruders every few hours. This has left me with some rare time for tinkering. Recently I built a cheap, quick and dirty tool to calibrate a project that I was

How to build a simple Arduino shutter speed tester – by Ethan Moses Continue Reading

sample s ADC claims better SNR Watt

Driving 14-segment displays with the MAX6954

Abstract: This article is how-to guide, intended as a quick learning aid for engineers considering using the MAX6954 to drive 14-segment monocolor LEDs. The MAX6954 is a versatile display driver, capable of controlling a mix of discrete, 7-segment, 14-segment, and 16-segment LED displays through a serial interface. This application note shows a typical application and configuration

Driving 14-segment displays with the MAX6954 Continue Reading

Scroll to Top