[Peterthinks] admits he’s no cabinet maker, so his projects use a lot of hot glue. He also admits he’s no video editor. However, his latest video uses some a MAX7219 to create a 600 character scrolling LED sign. You can see a video of the thing, below. Spoiler alert: not all characters are visible at […]
The first embedded ultra-compact Artificial Intelligence processing card for on the edge computing UP Bridge the Gap – a brand of AAEON Europe – is proud to launch AI Core: the first embedded ultra-compact Artificial Intelligence processing cards for edge computing. AI Core is a mini-PCIe module powered by Intel® Movidius™ Myriad™ 2 technology. This
AI Core – Artificial Intelligence On The Edge Continue Reading
It is getting harder and harder to tell homemade projects from commercial ones. A good case in point is [Mirko’s] all band radio which you can see in the video below the break. On the outside, it has a good looking case. On the inside, it uses a Si4730 radio which has excellent performance that would be
Makers Justin and friend Brett have created a fantastic DIY joystick controlled laser drawing machine powered by an Arduino development board. The framework has been constructed from laser cut wood and other parts totalling under $20 purchase to complete the project check out the video below to learn more. In between studying breaks during midterm
DIY joystick controlled laser drawing machine Continue Reading
One of the major problems encountered when using push buttons and switches in digital electronics project is the problem of bouncing. When we press a button once it may register twice and when we press it four times, in a row, for instance, it may register just twice. This occurrence is due to a property
Arduino or electronic enthusiasts searching for a new project to keep them busy this weekend may be interested in the awesome Arduino controlled CNC foam cutting machine, constructed from a variety of 3D printed parts and using an Arduino Uno and equipped with a CNC shield. “In this tutorial we will learn how to build
Arduino controlled CNC Foam Cutting Machine Continue Reading
The new Exynos 9810 brings premium features with a 2.9GHz custom CPU, an industry-first 6CA LTE modem and deep learning processing capabilities Samsung Electronics, a world leader in advanced semiconductor technology, today announced the launch of its latest premium application processor (AP), the Exynos 9 Series 9810. The Exynos 9810, built on Samsung’s second-generation 10-nanometer
Exynos 9 series applications processor has deep learning based software Continue Reading
Following up on Part 2, it’s time to talk about the output stage. This output stage is the brainchild of my friend Kostas, all I did was lay out the PCB. It is a fully discreet single-ended class-A output stage, outputting ~2.4V RMS. This is its schematic: This is the PCB: And this is the
Arduino controlled Dual Mono AK4490 DAC (part 3) Continue Reading
What is part way between a printed circuit board and a rats-nest of point-to-point wiring? We’re not sure, but this is it. [Johan von Konow] has come up with an inspired solution, 3D printing an Arduboy case with channels ready-made for all the wires. The effect with his 3DPCBoy is of a PCB without the PCB,
3D PRINTING FOR WIRE PATHS YIELDS AN ARDUBOY MINUS THE PCB Continue Reading
Adafruit has today announced the Adafruit Feather Bluefruit Sense development board will be soon arriving in their online store, building on the popular Feather nRF52840 Express, by adding a range of sensors that can be accessed wirelessly. The Feather microcontroller is equipped with Bluetooth Low Energy connectivity together with native USB support featuring the nRF52840. Offering an
Adafruit Feather Bluefruit wireless sensor board soon available Continue Reading
