LT8616 – Dual 42V Synchronous Monolithic Step-Down Regulator with 6.5μA Quiescent Current




Features

  • Wide Input Voltage Range: 3.4V to 42V
  • 2.5A and 1.5A Buck Regulators with Separate Inputs
  • Fast Minimum Switch On-Time: 35ns
  • Ultralow Quiescent Current Burst Mode® Operation:
  • 6.5μA IQ Regulating 12VIN to 5VOUT and 3.3VOUT
  • Output Ripple < 15mV
  • 180° Out of Phase Switching
  • Adjustable and Synchronizable: 200kHz to 3MHz
  • Accurate 1V Enable Pin Thresholds
  • Internal Compensation
  • Output Soft-Start and Tracking
  • TSSOP Package: Output Stays at or Below Regulation Voltage During Adjacent Pin Short or When a Pin Is Left Floating
  • Thermally Enhanced 28-Lead TSSOP Package

Synchronous Monolithic Step-Down Regulator




Description

The LT®8616 is a high efficiency, high speed, dual synchronous monolithic step-down switching regulator that consumes only 6.5μA of quiescent current with both channels enabled. Both channels contain all switches and necessary circuitry to minimize the need for external components. Low ripple Burst Mode operation enables high efficiency down to very low output currents while minimizing output ripple. A SYNC pin allows synchronization to an external clock. Internal compensation with peak current mode topology allows the use of small inductors and results in fast transient response and good loop stability. The enable pins have accurate 1V thresholds and can be used to program undervoltage lockout. Capacitors on the TR/SS pins programs the output voltage ramp rate during startup while the PG pins signal when each output is within 10% of the programmed output voltage. The LT8616 is available in a TSSOP package for high reliability.




Leave a Comment

*
= 3 + 8

(Spamcheck Enabled)

Read previous post:
Sending-Email
Sending Email using Arduino and ESP8266 WiFi Module

We are moving towards the World of Internet of Things (IoT). This technology plays a very important role in the...

Close
Scroll to top