My DIY Automatic Wake Up Light

Every year I notice that I have little issue waking up at 7am during summer months, yet waking up at 8am during winter is always unpleasant. Some quick research led me to find that the body is gradually woken up by light, which is why products such as the Phillips Wake-Up Light exist. However, with  a starting price of £60 for the (very) basic version, I’ve opted to make my own smartphone-connected, automated wake up light instead.

My DIY Automatic Wake Up Light

My aim was to create a setup that could automatically turn on a bright light 20 minutes before the next alarm on my phone – something that I could ‘set and forget’. Simple solutions are always favoured because they’re usually cheap, so I decided to go with a desk lamp connected to a timed mains switch. This unfortunately means that there’s no dimming of the light. For the phone-based automation, I chose Belkin’s WeMo WiFi timed switch (£30 from Maplin). There are cheaper Chinese alternatives available, but my research found them to be lacking in third-party support. I then decided on getting a 5000K lightbulb, since that’s apparently a close match to the colour temperature of summer daylight. I found a 50W (200W equivalent) fluorescent spiral bulb on eBay for £5. I’ve already got a standard E27-screw desk lamp, so the total cost for this project was £35.

The desk lamp (with the huge daylight bulb fitted) is flipped to on, then plugged into the WeMo switch, which is connected to my WiFi network.

For more detail: My DIY Automatic Wake Up Light

This Post / Project can also be found using search terms:

  • diy automated wake up lights

Leave a Comment

= 5 + 5

(Spamcheck Enabled)

Read previous post:
Arduino Hearing Impaired Alarm Clock
Open Source Hearing Impaired Alarm Clock using Arduino

Activities of daily living (ADL) are self-care activities that are usually taken for granted, since as the name implies they are performed...

Scroll to top