I was attending the graduation of my friend last May and my friend leaned over to me and said “Hey Rachel, you should do an Arduino project so that you’re really easy to spot when you graduate.” So I did just that. The cap has an 8 by 32 grid of LED’s that scrolls the
Epic Graduation Cap Continue Reading
For a course we followed at KTH in Sweden, we were assigned to create an artefact which could change shape. We made a fox shape artefact, supposed to remind you to take a break from work or studying. The general concept it that the fox will display breathing like motions. When you are starting to
Crimson Fox: Raising Awareness to Take a Break While Working Continue Reading
Unexpected downtime can be catastrophic for businesses. When your operations grind to a halt, your website becomes unavailable, and your productivity falls, it has a knock-on effect on your revenue and profits. In addition to this, unforeseen downtime can affect your professional reputation and cause your target audience to view you as unreliable. Due to
How to Eliminate Downtime in Your Business Continue Reading
Green Lights is a project that was created to teach students about physical computing. This includes Inputs and Outputs, Electricity, programming with Arduino, and a little bit about traffic control systems. The intersection will be setup at the front of the classroom and students will be split up into teams. Teams will be given note
In this instructable I will show you how to make weather station system by yourself. All you need is basic knowledge in electronics, programming and a little bit of time. This project is still in the making. This is only first part. Upgrades will be uploaded in next one or two months. If you have
Weather Station With Data Logging Continue Reading
This instructable was created in fulfillment of the project requirement of the Makecourse at the University of South Florida (www.makecourse.com). The Flex Claw is the next best project for any student, engineer, and tinkerer alike that will surely grip your audience’s attention. Run fully by an Arduino Uno, the Flex Claw is a simplified approach
The Shensuo dress is a piece of wearable technology which allieviates the dress stress of the modern woman; through its range of temperature and humidity sensors assisted by a clock as well as a manual override. Using two small motors built into the bodice attached to the skirt via string, which is pulled to rotate
Introduction Coffee is a beverage consumed around the world for both its sensory and functional properties. Coffee’s taste, aroma, caffeine and antioxidant content are just a few qualities that have made the coffee industry so successful. While the green beans origin, quality, and species all effect the quality of the end product, the roasting of
Degree of Roast Infrared Analyzer for Coffee Roasters Continue Reading
3/1/19 Update: Some people are reporting pain, which is caused by the quick polarity reversal. I will update the code to reduce that problem, but for the time being you should hold off on building this. Hyperhidrosis is a condition that causes excessive sweating—even when sweating isn’t called for. It can cause sweating anywhere on
Stop Sweaty Hands and Feet With Sweat Fighter! Continue Reading
This Instructable will show you an easy way to wire up an Arduino Nano to various PCB breakout boards. This project came about during my search for an effective, but non-destructive way to interconnect several module. I had five modules I wanted to interconnect: An Arduino A 5-inch 800×480 graphical LCD touch panel from Haoyu
Make a Custom Arduino Test Bench Using Wirewrapping Continue Reading
