Add a fuse where it´s desirable




Nowadays, when “almost everything” works on electricity we can see still more devices connected to mains line. That´s why it often happens, that many small-power devices are connected to one (circuit breaker fused) line. To increase a safety, it´s usually advantageous to fuse particular devices separately – for example by small glass fuses. Somewhere it´s advantageous on a panel or directly on a PCB, elsewhere directly in a control relay interface module and in many cases directly in a place of connection.

For this purpose a novelty in our offer is very suitable – 3-pole terminal block MPF03-10, where one of poles is fused by a glass tube fuse 5x20mm. In praxis it can look so, that on a place where you so far used a classic (“chocolate”) terminal block, you can use MPF03 and insert a suitable fuse.

 

In the MPF series can be found series with 1-5 poles. As already a name says, pin spacing (pitch) of the MPF series is 10mm. On stock we have the 3-pole version MPF03-10 ideally suitable for mains line appliances (L,N,PE). Exact dimensions and further parameters can be found in the Euroclamp MPF03-10 datasheet.

In case of interest in any Euroclamp product, please contact us at [email protected].

 Add a fuse where it´s desirable

JLCPCB – Prototype 10 PCBs for $2 + 2 days Lead Time
China’s Largest PCB Prototype Enterprise, 300,000+ Customers & 10,000+ Online Orders Per Day
Inside a huge PCB factory: https://www.youtube.com/watch?v=_XCznQFV-Mw

READ  Simple, easy and cheap wireless presenter







Leave a Comment

*
= 4 + 1

(Spamcheck Enabled)

Read previous post:
Developing your own Flowcode 7 controlled weather station
Developing your own Flowcode 7 controlled weather station

This project details a Flowcode and E-blocks based weather station capable of reading local temperature and humidity with 2 remote...

Close
Scroll to top