boost

LTC3402 2A 3MHz Micropower Synchronous Boost Converter

LTC3402 – 2A, 3MHz Micropower Synchronous Boost Converter

Features Synchronous Rectification: Up to 97% Efficiency 2A Switch Current Rating Fixed Frequency Operation Up to 3MHz Wide Input Range: 0.5V to 5V Very Low Quiescent Current: 38µA (Burst Mode Operation) 2.6V to 5V Adjustable Output Voltage 0.85V (Typ) Start-Up Voltage No External Schottky Diode Required (VOUT < 4.3V) Synchronizable Switching Frequency Burst Mode Enable […]

LTC3402 – 2A, 3MHz Micropower Synchronous Boost Converter Read More »

Integrated Coulomb Counter

LTC3335 – Nanopower Buck-Boost DC/DC with Integrated Coulomb Counter

Features 680nA Input Quiescent Current (Output in Regulation at No Load) 1.8V to 5.5V Input Operating Range Selectable Output Voltages of 1.8V, 2.5V, 2.8V, 3V, 3.3V, 3.6V, 4.5V, 5V Integrated Coulomb Counter Measures Accumulated Battery Discharge ±5% Battery Discharge Measurement Accuracy Programmable Peak Input Current of 5mA, 10mA, 15mA, 25mA, 50mA, 100mA, 150mA, 250mA Up to 50mA of Output

LTC3335 – Nanopower Buck-Boost DC/DC with Integrated Coulomb Counter Read More »

Boost DC DC Converter

LT8494 – SEPIC/Boost DC/DC Converter with 2A, 70V Switch, and 7μA Quiescent Current

Features Low Ripple Burst Mode® Operation: 7μA IQ at 12VIN to 5VOUT Output Ripple (<10mV Typ.) Dual Supply Pins: Improves Efficiency Reduces Minimum Supply Voltage to ~1V after Start-Up to Extend Battery Life Wide Input Voltage Range of ~1V to 60V (2.5V to 32V for Start-Up) PG Functional for Input Supply Down to 1.3V FMEA Fault

LT8494 – SEPIC/Boost DC/DC Converter with 2A, 70V Switch, and 7μA Quiescent Current Read More »

Buck Boost μModule

LTM8056 – 58VIN, 48VOUT Buck-Boost μModule (Power Module) Regulator

Features Complete Buck-Boost Switch Mode Power Supply Wide Input Voltage Range: 5V to 58V 12V/1.7A Output from 6VIN 12V/3.4A Output from 12VIN 12V/5.4A Output from 24VIN Up to 96% Efficient Adjustable Input and Output Average Current Limits Input and Output Current Monitors Parallelable for Increased Output Current Wide Output Voltage Range: 1.2V to 48V Selectable

LTM8056 – 58VIN, 48VOUT Buck-Boost μModule (Power Module) Regulator Read More »

Boost μModule Power Module Regulator

LTM8055 – 36VIN, 8.5A Buck-Boost μModule (Power Module) Regulator

Features Complete Buck-Boost Switch Mode Power Supply VOUT Equal, Greater, Less Than VIN Wide Input Voltage Range: 5V to 36V 12V/3A Output from 6VIN 12V/6A Output from 12VIN 12V/8.5A Output from 24VIN Up to 97.5% Efficient Adjustable Input and Output Average Current Limits Input and Output Current Monitors Parallelable for Increased Output Current Wide Output

LTM8055 – 36VIN, 8.5A Buck-Boost μModule (Power Module) Regulator Read More »

Buck boost inverting controller delivers up to

Buck/boost/inverting controller delivers up to 20 A

A synchronous PWM controller for negative-to-negative or negative-to-positive DC/DC conversion, the LT8709 from Linear Technology is easily configured for buck, boost, buck-boost, and inverting topologies to accommodate a wide range of power-supply designs. The device’s synchronous operation means that the output diode is replaced with a high-efficiency P-channel MOSFET, increasing efficiency and allowing for higher

Buck/boost/inverting controller delivers up to 20 A Read More »

Scroll to Top