The project TiDiGino We developed a new GSM remote control called TiDiGino. The name recalls the initials (TDGxx) of our previous GSM remote control and is also based on the Arduino project. All the details of this circuit can be found below, but no the sketch, because this is your assignment. The contestYou have to write the firmware for this project. The device must perform all the functions
TiDiGino Contest using arduino Continue Reading
We’re going to show how to wire up and control an Ikea DIODER LED strip with an arduino, using a 16X PWM LED Fader board as an intermediary. The 16X PWM board is basically a bunch of mosfets under PWM control (switches that turn on and off really fast) that can be used to mix
Control Ikea Dioder LED Strip with Arduino + 16X PWM LED Fader Board using arduino Continue Reading
Secret Knock Description – My final project is a door lock that listens for your personalized knock. The lock uses an arduino board and a piezo speaker and will not unlock the door unless the specific pattern is used as a knock. Arduino Program – /* Detects patterns of knocks and triggers a motor to
Secret Knock Final using arduino Continue Reading
Overview Jump to the Table of Contents This is a simple board for measuring temperature. It uses an AD595 chip to make thermocouple measurements easy. The AD595 amplifies the thermocouple signal and conditions it for easy use. Thermocouples are great due to their linearity over a large range, and their high temperature capability (up to
Thermocouple Sensor 1.0 using arduino Continue Reading
The HMC5883L magnetometer This component (a small chip) HMC5883L, produced by Honeywell, bases its operation on AMR (Anisotropic Magnetoresistive) technology and allows you to be able to measure both the direction and the magnitude of the earth’s magnetic field. This magnetometer HMC5883L has within 3 magneto-resistive sensors arranged on three perpendicular axes (the Cartesian axes x,
Welcome to my 3rd Instructable everyone ! Today we’re going to build a ‘device’ to control a mini-sized helicopter with a Wii Nunchuk. The helicopter that we’re using is a cheap (26$) 3-channel (yaw, throttle, pitch) helicopter that I bought a 1 month back from Dealextreme.com . I can say that it is a VERY
Nunchuk-controlled Helicopter using arduino Continue Reading
I just hope every body’s heard. The Bird is the Word! This is a simple device to play Surfin Bird really loudly when someone trips off the motion sensor. If you don’t already own an Adafruit Wave Shield, I’d highly suggest purchasing one. It’s become my favorite shield by far. I love the idea of
Surfin’ Bird (Arduino Style) using arduino Continue Reading
Contents 1 Team Members 2 Mentor 3 Concept 4 Softwares Used 5 circuits 5.1 Pre Amp circuit 5.1.1 Circuit Diagram 5.1.2 Working 5.2 EEPROM circuit 5.3 Led Matrix display circuit 6 Algorithm for silence & noise removal 6.1 Pre-Emphasis 6.2 Silence and Noise Removal 6.2.1 Idea 6.2.2 Implementation 7 Codebook Formation 7.1 Database 7.2 Main
Voice Recognition System using arduino Continue Reading
This is a cute little project that takes a pumpkin, motion sensor, and some parts from Radio Shack. It was fun to create and build. This project was sponsored by the Radio Shack Great Create and I was able to make the whole thing with parts available from Radio Shack. Thanks for the gift card,
Arduino powered Haunted Pumpkin using arduino Continue Reading
This Instructable is about: building an automated photo booth. The total build cost was around $150 as I re-used a lot of the components and materials I already had in my garage – in addition to what I could salvage from scrap yards. Why? – I decided to build my own photo booth after trying
A Makers Wedding – Photo booth usnig arduino Continue Reading
