Hey, I am a big fan of Instructables. I have consistently used it for the past 3 years and now its time for me to write one myself.Here we go. This instructable is for those who want to make some inanimate object tweet automatically. Like say for example you are building a robot and you want the
How to tweet from an Arduino using the wifi sheild Continue Reading
This was my first time attending the Internet of Things Pune Group. It was such a fun learning experience! At today’s meetup, Dhiraj and Nishant started out by introducing the InduinoX and Arduino Uno boards along with the Processing IDE that is used to write the code. After playing around with couple of sensors on
Arduino based Tic Tac Toe with TV Remote Continue Reading
This gesture controlled robot uses Arduino,ADXL335 accelerometer and RF transmitter-receiver pair. We will divide the entire robot into 3 parts the transmitter,the receiver and the robot. The different gestures that have been mapped to the direction of the bot are- Hand parallel to the ground-stationary Hand tilted forward-forward Hand tilted backward-backward Hand tilted right-right Hand
Gesture controlled robot using Arduino Continue Reading
Although there are many garage door projects on Instructable using Arduinos, I needed/wanted something different. Last year, we had a warm summer and when I would come home after work, I would leave the garage door open about 1 foot so it could cool off. The trouble was that several nights I left the garage
Arduino Garage Controller Continue Reading
Required Parts: This project requires two Arduino boards which can be bought from http://www.adafruit.com/category/17 This project uses two Arduino Uno compatible boards. An L293D or other Dual H-Bridge Motor Driver chip will be needed to drive the motors of the RC car. This can be found here: http://www.adafruit.com/products/807 Finally, this project requires the RF transmitter
Computer controlled RC car with two Arduinos Continue Reading
Naturally, the Uno does not natively support keyboard strokes, unlike it’s Leonardo brother. Most of Google will tell you you need to do some firmware workarounds and ATMEGA reprogramming just to get it working and the entire ordeal is a mess. If you’re like me, you’ve found that out just after buying one. Here is
Using an Arduino Uno R3 as a Game Controller Continue Reading
Its been awhile since i last posted something here. Was kinda busy with my university exams & all! Idea for this project was in my mind for very long & i don’t think anyone would’ve done this project with Autohotkey! Anyway, this is a necessity for me, honestly i’m a super lazy person & i
Home Automation Using Arduino & Autohotkey Continue Reading
FTDI has announced its commitment to supporting the Android Open Accessories initiative, thus allowing engineers to realize exciting new system designs that are compatible with tablets and smartphones utilising the highly popular Android operating system. “FTDI is very excited about the new Android Open Accessories initiative and in response has decided to provide support for
FTDI Vinco USB Host/Device Development Platform – also for Android & Arduino Continue Reading
INTRODUCTION : The development of high performance motor drives is very important in industrial as well as other purpose applications. Generally all high performance motor drives use quadrature encoders and PID control because of its simplicity and precise control. The quadrature encoder acts as a feedback from the motor, it is connected to the microcontroller
Arduino PID Motor Controller Continue Reading
This is a project based on Arduino board which can measure the unknown resistance values and perform diode test and continuity testing. When we connect the unknown resistor on the breadboard circuit, the 16×2 LCD displays the resistor value and when we connect a diode the LCD displays the type of diode if it is
DIY: Arduino Based Ohmmeter Continue Reading
