*NOTE* THIS PROJECT IS DONE BY A GROUP OF STUDENTS FROM SINGAPORE POLYTECHNIC Sous-vide (/suËËviËd/; French for “under vacuum”)[1] is a method of cooking food sealed in airtight plastic bags in a water bath for a long time—72 hours in some cases—at an accurately determined temperature much lower than normally used for cooking, typically around
Sous-vide Arduino Shield Continue Reading
Although products are becoming more and more available for monitoring your home power usage, I’m one of those idiots who can’t leave well enough alone and who would rather shell out $100 and hours of my time in order to save $20 and learn something in the process. Building on the fine work of Trystan
Arduino home energy monitor shield Continue Reading
Hello guys, i make this instructable for the people that liked the electronics and the botanic, with this you have the data about the temperatura and the humidity of your orchard and register this in a data base MySQL. For this proyect you need some knowledge of programing in PHP and MySQL, we will make
Save data of temperature and humidity on MySQL with Arduino Uno and Wifly Continue Reading
Send sound into your Arduino. This Instructable will show you how to prepare audio so that it can be sampled and processed by an Arduino to make sound responsive projects and audio effects. (This article is a companion to another Instructable I’ve written about building an audio output circuit for an Arduino, find that here) Some
Audio Input using an Arduino Board Continue Reading
LDR Robot with IR and a Servo The LDR/IR Robot is designed to seek out light and avoid obstacles. The robot uses the Light Dependent Resistor to seek out light and the Infrared Sensor to detect and avoid objects in its path. The following are instructions with pictures to show exactly how we built our
LDR Robot using an Arduino Continue Reading
I had one remote controlled project that needed an Arduino running 24/7 but I didn’t want to leave my $32 Arduino UNO, so I decided to buy some pieces and created my own Arduino. The most important part was buying the microcontroller. These were my options: ATMega328P-PU with Optiboot ~ $5.50 (Sparkfun) / $5.19 (Digikey)
Burning the Bootloader on ATMega328 using Arduino UNO as ISP Continue Reading
In this Instructable we will explain how infrared signals are used by a remote to control a toy or device, then show how a simple circuit can be added to an Arduino to operate the same device through free, Open Source software. This document is part of a series covering the Puzzlebox Orbit, a brain-controlled helicopter that features
Using an Arduino to Control an Infrared Helicopter Continue Reading
I was wondering about on making a sequencer, a big 16 step sequencer was what I wanted to make. To it’s full extension with lots of features including single leds for each step, midi input and output, etc. Then I realised that I should start from a more basic model and then maybe tweak around to see
Arduino Board Step Sequencer Continue Reading
There are several good Jeopardy/Game Show lockout buttons/buzzers, but none incorporate the timing rules of Jeopardy. I am learning about the Arduino and I thought that this would be a great project to practice with. The rules include a question reading period with no timeout to reading the question. During this period, any player who
Jeopardy Ring-in Buttons with Built-in Rules using Arduino Continue Reading
Today, I’m going to show you how to make an Arduino motor shield (driver) at a low cost. It works splendidly, its posses almost all the characteristics of the original Arduino motor shield. It’s almost considered as a clone. The original Arduino motor shield has the same motor driver chip (L298), the only difference with it,
DIY Arduino Motor Shield Continue Reading
