Small 4-wire resistive touchscreens are now amazingly cheap: they are produced in such enormous quantities for mobile phones, PDAs, and particularly handheld games such as the Nintendo DS that they can be bought brand new for under US$10. Larger touchscreens are also rapidly falling in price. The popularity of netbooks with screens between 7″ and
Touch Control Panel using Arduino Continue Reading
This was created to be some eye-candy for my kitchen. I wanted something unique for a special blank space on my wall, and adding movement, blinky lights and interesting mechanical “guts” made it even better. Ultimately, this project ended up requiring the following range of skills: 1. Basic mechanical skills 2. Light metalworking and fabrication
STEAMPUNK STEAM GAUGE, POWERED BY ARDUINO Continue Reading
Origami is the traditional Japanese art of paper folding. In this project, with a little help from an Arduino, you can bring your origami into the 21st century and make it an interactive art! The result shown here uses Bare Conductive paint to give an origami flower proximity sensing powers. When you put your hand
Proximity Sensing Origami Flower using Arduino Continue Reading
This sketch shows you how to read and calibrate the Esplora’s light sensor. Because light levels vary from one location to another, you need to calibrate the sensor for each location. To do this, you read the sensor for a few seconds, and save the highest and lowest readings as maximum and minimum. You’ll use
Arduino Esplora Light Calibrator Continue Reading
This server room environmental monitoring system is a low cost high performance device with the same onboard features as commercial devices costing hundreds of dollars more. In addition to a low cost platform we will provide low cost sensors for many important devices to insure your equipment stays safe and sound. Full instructions are available
Open Source Server Room Monitor using Arduino Continue Reading
I’m researching squeeze sensing as a mode of tactile interface. Here I will cover the process of developing a squeezeable sensor and the firmware/software concerns associated with interpreting the data from the sensor. This fulfills the “sensor project” for my class called Computational Principles in Media Arts taught in AME at ASU by Todd Ingalls
Sensing Squeeze using Arduino Continue Reading
This is a PIR motion sensor device that works with the arduino uno. In order to make it covert enough to be placed in multiple settings and portable enough to fit most places, I decided to make the case for it appear as a speaker. The inspiration for this project: My cat is a jerk. One of his
Cat Repelling PIR motion sensor (covert) speaker box alarm using Arduino Continue Reading
There are quite a few geiger counter instructables. The difference with this one is that I wanted to give it a modern interface, similar to smart phone touch screens, that anyone would feel comfortable using. The reason for this is that I want to use it as an educational tool to teach kids (and interested adults!) about
Geiger Counter with Touch Interface! Continue Reading
Security system sensors such as motion detectors, reed switches, pressure mats, glass-break detectors, infra-red beams, and conductive film can be very handy for all sorts of things including home automation systems, interactive art installations – and sometimes even security systems! Almost all security system sensors provide a simple switched output that changes state based on
Security / Automation Sensors using Arduino Continue Reading
First of all lets get this out of the way… It’s so bad This is going to be showing how to hack the Nintendo Powerglove. By hack I mean tap into the flex sensors and use the buttons and d pad and add anything you want. In my case I added an accelerometer. I got mine from
Hacking a Powerglove using Arduino Continue Reading
