I love the look of old 1920’s radios. They are the embodiment of a decade. The radios that I like the most were vacuum tube cathedral radios made by Philco. When I think of old-timey radios those are the first thing that pops into my mind. So, I decided to make one using an old Arduino
Retro Arduino Radio Continue Reading
I made an RGB pumpkin wall light, which can be controlled by a smartphone via Bluetooth, it has different modes and different colors so you can choose the color of the light according to your mode. Description Halloween is about to come and already all are doing their preparations, in my previous project I made
Bluetooth Controlled RGB LED LAMP Continue Reading
In this project I am controlling my three automation projects using single application made by me using MIT app inventor platform. Description As we all know that the world is slowly shifting towards automation, we require automation everywhere, like in industries, factories, houses, energy management systems etc. and also it is very important for us
CONTROLLING MY THREE AUTOMATION PROJECTS USING SINGLE MOBILE APPLICATION Continue Reading
DIY your own Arduino UNO with the JLC PCB Description Schematic of ARDUINO S3v3 Details of ARDUINO S3v3 X1: DE-9 serial connector Used to connect a computer (or other devices) using RS-232 standard. Needs a serial cable, with at least 4 pins connected: 2, 3, 4, and 5. Works only when JP0 is set to
DIY Arduino UNO Continue Reading
It is a model of RADAR. It describes how a radar works in real time. Description RADAR model is used to know how the real time radar works. It is constructed using ARDUINO UNO, ULTRASONIC SENSOR and SERVO MOTOR. We also used to show the output. That software name is PROCESSING 3. Code for software PROCESSING 3: Code for
RADAR model using ARDUINO and ULTRASONIC SENSOR Continue Reading
In this example, I’ll show you how to use the cc2541 to communicate from one microcontroller to another in BOTH DIRECTIONS (BLE-HM-10). Introduction The HM-10 is a Bluetooth Low Energy (BLE) module for embedded systems that allows for wireless communication with BLE-capable devices (e.g. iPhone and iPad). It is fully configurable using a comprehensive and
Bluetooth 4.0 HM-10 cc2541 Duplex Continue Reading
If you want to add interest to any video you are making, a good way to doing it is to add motion. There are an infinite number of motion effects you could use in your videos, but a classic, and very pleasing one, is a sliding effect. You will see this effect used in numerous
WiFi Controlled Camera Slider Continue Reading
Welcome to my version of the LED reactive table! I was inspired by previous work using discrete LEDs, such as this one, but I figured it would be easier and more fun to use NeoPixels — programmable RGB LEDs that can be set to any color you want. The table consists of a large array of infrared emitters
NeoPixel Reactive Table Continue Reading
I’ve always wanted to do an Arduino project, but never had any great ideas for one until my family was invited to a fancy hat party. With two weeks lead time, I was curious if I could both plan and execute a motion sensitive LED animation hat. Turns out I could! I probably went a
Fancy LED Hat Continue Reading
This project describes the first part of the following two projects: A wireless doorbell transmitter as described in this Instructable A wireless doorbell receiver to be described in the Wireless Doorbell Receiver Instructable When I am sitting in the backyard of my house I cannot hear it when somebody is ringing the doorbell at the front door.
Wireless Doorbell Transmitter Continue Reading
