Projects

53edb6cb4c88408a8a8018c50ab30198

Arduino Line Tracking Robot Car

This line tracking robot car was built base on the prototype mentioned in the previous knowledge item. You can find the details for the prototype: http://www.rs-online.com/designspark/electronics/eng/knowledge-item/arduino-line-tracking-robot-car-prototype Bills of Materials: PCB   Geared Motor OSRAM Opto Semiconductors Photodiode (RS stock number: 654-8902) Nichia LED (RS stock number: 713-3996) RS 10k Ohm resistor (RS stock number: 707-8906) RS 470 Ohm resistor (RS

Arduino Line Tracking Robot Car Continue Reading

Johnny 6 is alive

Johnny 6 is Alive!

Designing a custom plate for the Arduino Robot, adding jumbo LEDs and displaying readings from an ultrasonic distance sensor to the LCD. My previous post on the Arduino Robot described how I took the Runaway Robot sketch and modified it work with the PING ultrasonic distance sensor. This post is still based around the same

Johnny 6 is Alive! Continue Reading

Developing your own Flowcode 7 controlled weather station

Developing your own Flowcode 7 controlled weather station

This project details a Flowcode and E-blocks based weather station capable of reading local temperature and humidity with 2 remote thermo-hygrometer sensors. The local board also incorporates a real time clock. This article has been contributed by Flowcode user John Crow. Flowcode can be downloaded and trialled for free at the Matrix Technology Solutions website.

Developing your own Flowcode 7 controlled weather station Continue Reading

Old Sole

Old Sole

Old Sole interrupts normal youthful days to force young people to interact with their environment in a different way. If the young shoe-wearer takes significantly more steps than the elderly individual with the walker, the shoes light up and vibrate uncomfortably, reminding the young person that somebody on the other end of the old sole

Old Sole Continue Reading

Scroll to Top