I originally started this project because I wanted to recreate the scene in the movie the Close Encounters of the Third Kind where the humans are communicating with the Mothership via a huge color organ. So I glued various bits of software together and made some prototypes and before I knew it I was talking […]
This example shows you how to read analog input from the physical world using a potentiometer. A potentiometer is a simple mechanical device that provides a varying amount of resistance when its shaft is turned. By passing voltage through a potentiometer and into an analog input on your Arduino, it is possible to measure the amount of
Analog Read Serial using Arduino Continue Reading
Another quick hack. I purchased a voice changer because I was looking for something cheap that could be hacked into an voice input device. Basically I wanted to animate a skull when I spoke. Added bonus, now the skull puppet would also have a scary voice. I am going to show you how to hack
Hack a voice changer to add an Arduino input Continue Reading
UPDATE (8/29/13): Thank you readers for your enthusiasm and kind remarks regarding this project! It has been a tremendous journey since I started this project back in March, but I am very glad with the resulting product and the excitement with which it has been received by the maker community. Happy building! -Cyrus Do you like
DIY Arduino Remote Control and Lego RC Vehicle!! Continue Reading
This instructable will guide you through the process of making your very own star-cluster from LEDs and acrylic. I made this piece for my electronics final project at college and had access to a machine shop. This instructable assumes that you have access to similar tools. This project was very much inspired by http://www.instructables.com/id/working-progress-n-how-to-make-a-multilayered-a/#step8. Step 1:
3-dimensional Star Cluster using an Arduino Continue Reading
Lite Brite pegs look like LED’s don’t they? That’s what I though the other day after working on an LED cube for a few hours. I happened to see my daughter’s Lite Brite sitting there, and I looked at the pile of LED’s on my desk. What a perfect match! In this instructable I will
Lite Brite LED clock using an Arduino Continue Reading
Make a 3D interface using an six resistors, aluminum foil, and an Arduino. Take that, Wii. Update: a much more thorough explanation of this project is available from Make Magazine. It might be easier to follow their instructions, and I think their code is more up to date. The basic goal here was to make
DIY 3D Controller using an Arduino Continue Reading
How to make an “analog” input device from fabric and a few other necessary materials. “Analog” in parenthesis because, although it is made up of 4 analog inputs, the only analog transition between the directions (up, right, down and left) comes from the buffering material (in this case 3cm thick squishy packing material) that absorbs
Analog Fabric Joypad using an Arduino Continue Reading
Impressed by these two LEGO® Dragster sets, a 250 pieces LEGO®TECHNIC Dragster 8847 (released in 1983) and a 391 pieces Top Fuel Racing 5533 (released in 1999). These two Dragsters inspired me to build my own LEGO® dragster, the “12 Thumbs”. The name “12 Thumbs” came after I finished the design. While I was playing with my finished
“12 Thumbs” R/C LEGO Dragster Continue Reading
After a break of around two decades I’ve recently started building a model railway. One of the issues I’ve faced is trying to work out how fast I should be running the trains so that their speed reflects reality given the scale at which they are modelled. I’m guessing the details won’t interest everyone reading
An Arduino Powered (Scale) Speed Trap Continue Reading
