I know, I know, this one has such a simple name. Where’s the pun? Honestly, the description was just to long to include one. Maybe it could have been “What’s Up? Sensing Orientation With The ADXL335 + Arduino” – Ehhh… Probably not. A few weeks ago we wrote a tutorial about using the ADXL345 to
Sensing Orientation With The ADXL335 + Arduino Continue Reading
One of the first articles we did was on the hmc6352 digital compass. Well this is his older brother (or younger but smarter). I really don’t know what to say about the HMC5883L other than it is a three axis magnetometer, so it is capable of sensing in 3 directions. That doesn’t mean that it
Triple Axis Magnetometer HMC5883L + Arduino Continue Reading
What this circuit does A 555 timer can turn a slowly changing analog voltage into a stream of pulses whose frequency rises and falls with that voltage. The output is a square wave, so it can be sent down a long cable, counted by a microcontroller, or fed into a frequency counter, without the voltage
NE555 Voltage-to-Frequency Converter: How It Works and How to Build One Continue Reading
The following code and library are compatible with arduino software 1.0+ ONLY. You can download the newest version of the arduino software here. Outputting data can be extremely useful, and typically when we look at doing this, it is either to the Arduino’s serial terminal, or to some sort of display. But what about making
Displaying on Paper – Thermal Printer + Arduino Continue Reading
There are many wireless communication options when connecting Arduino boards. One of the most popular ones is the Wi-Fi. It works well at small distances, and around Wi-Fi hotspots, however when the modules need to connect over long distance at areas where Internet is not present, Wi-Fi is not an option. Luckily there is a
Long Distance Remote Light Sensor With RFM95W/RFM98W LoRa Continue Reading
Recently somebody asked for tutorial on Infrared Flame Sensor. It took a while due to severe work overload, but finally I succeeded to make it. The Infrared flame sensors use infrared light to detect flame. While experimenting with my one I discovered that in direct daylight they don’t work very well due to the infrared
Arduino Nano: Flame Sensor With Visuino Continue Reading
The Bosch BNO055 combines tri-axis accelerometers, gyroscopes, and magnetometers to provide orientation to users. About the Sensor The BNO055 uses three triple-axis sensors to simultaneously measure tangential acceleration (via an accelerometer), rotational acceleration (via a gyroscope), and the strength of the local magnetic field (via a magnetometer). Data can then be either sent to an external
Capturing IMU Data with a BNO055 Absolute Orientation Sensor Continue Reading
Ultrasonic range finder using 8051 mictrocontroller has been already published by me in this website. This time it is an ultrasonic range finder using arduino. HC-SR04 ultrasonic range finder module is used as the sensor here. The display consists of a three digit multiplexed seven segment display. This range finder can measure up to 200
Ultrasonic range finder using arduino Continue Reading
This article is about a simple three digit digital thermometer using arduino. Range of this thermometer is from 0°C to 99.9°C. There is also a provision for displaying the temperature in °F scale. Three terminal analog temperature sensor LM35 is used as the sensor here. LM35 can measure temperatures between -55°C to +155°C. The supply
Digital thermometer using arduino and LM35 Continue Reading
PWM or pulse width modulation is a very common method used for controlling the power across devices like motor, light etc. In PWM method the power across the load is controlled by varying the duty cycle of the drive signal. More the duty cycle more power is delivered across the load and less the duty
PWM motor speed control using Arduino Continue Reading
