This instructable will show you how to use an Arduino to send and receive a variety of MIDI messages so you can start building your own MIDI controllers and instruments. First I’ll talk a little bit about MIDI protocol, if you’re just looking for sample code skip ahead to steps 5-9. If you know absolutely […]
Send and Receive MIDI with Arduino Continue Reading
Top hats are cool; just like bow ties. Not only are they stylish, but they give you a lot of room for incorporating techno goodness. I recently had cause to buy a tuxedo, which necessitated a kilt, and then a top hat. You know how it goes. To the tux I added silver buttons, the
Make Your Hat With Full Of Stars Using Arduino Continue Reading
HandSight is a prototype glove to aid the blind. It can sense the lightness or darkness of a surface with tactile feedback from a vibration motor for each individual finger. It can also sense distance from physical objects or obstructions and indicate direction and distance with the same vibration feedback. It supports additional modes, and
HandSight: A Glove for the Blind to Feel Shapes and Navigate Obstacles Continue Reading
Paint Pulse is a project which seeks to build upon the water marbling crafts of Ebru and Suminagashi with digital behavioral additions. The idea is to design intricate, flowing patterns of paint directly on the surface of water which you can capture on the surface of paper. Expert crafters can hold an intricate mastery over the art and
Paint Pulse: Digital Water Marbling Continue Reading
I always wanted an old traffic signal and finally got one recently. However, it was very simply wired so that all the lights were fixed on. What fun is that? I also wanted to try out an Arduino controller and thought this would be a nice simple project to incorporate it into. This Instructable will
Traffic Signal / Stop Light Wiring with Arduino Controller Continue Reading
This instructable describes how to upgrade your globe to a motorized version. It looks amazingly better on the shelf when it is slowly rotating, and any demonstration with your kids (to explain the day/night cycle or the seasons) will gain in interest. No need to rotate the globe by hand while painfully holding the flash
I was looking at all those swoopy-zoomy internet connected and controllable thermostats. “Self,” I told myself, “we should make one of those.” He didn’t seem all that excited about that – I mean, what do we know about hardware, firmware, electronics or HVAC? Well, now’s as good as any to figure it out. So without
Arduino Powered 3-zone thermostat Continue Reading
Continuing from my Intro to Arduino post, this Instructable will go over some slightly more advanced topics with Arduino, specifically relating to controlling and managing many inputs and outputs. The next class covers how to connect the Arduino’s inputs and outputs to MIDI. Parts List: (1x) Arduino Uno Amazon or you can pick one up
Intermediate Arduino: Inputs and Outputs using arduino Continue Reading
Blast away your friends for hours on end with this custom laser tag system. Who needs to pay to play in an arena when you can make your very own game? Best of all, no special equipment is required, because the “guns” are regular universal TV remotes! Step 1: Parts and Materials This list includes
Universal Remote Laser Tag Using Arduino Continue Reading
The Arduino is a pocket-sized computer (also called a “microcontroller“) that you can program and use to control circuits. It interacts with the outside word through sensors, leds, motors, speakers… even the internet; this makes it a flexible platform for lots of creative projects. Some popular uses include: – programmable light displays that respond to
Beginner Arduino Continue Reading
