Electronic market is full of devices called pedometer and fitness tracker. They counts the number of steps you have taken, distance you have covered, whether you are walking or running and bunch of other stuff. Ever wondered, how these devices perform such measurements. I decided to make one on my own and share the knowledge […]
Distinguish Walking and Running Using Machine Learning Continue Reading
Hello everyone. I am a graphic designer with a restless soul (my site www.inoace.com). I loved doing electronics years ago and than got busy with life and job. I am now blessed with some time ( rare now a days 😛 ). This is my first microcontroller / arduino based project. Edit: Just a tip, I was
Sparrow – My Assistant Continue Reading
Donation boxes can be much more interesting and attractive when you combine them with electronics and a little bit of programming. This instructable will show you how to. As the name explains, making donation boxes interactive can help you gain much more attention and make people happy at the same time! Indeed, and awesome way
The Interactive Donation Box Continue Reading
Hi everyone, here it is my new project, a mouse controlled with the movement of the head!I decided to make this project once I received my accelerometer/gyroscope MPU6050 from IC Station, and I wanted to do something useful with this.Then I found out that a “Head Mouse” already exists, made by Martin Millmore with another
Head Mouse With MPU6050 and Arduino Micro Continue Reading
Introduction / Why this project In 2016 I build my first fish feeder, see Fish Feeder 1. The feeder worked fine for more then half a year. After that period the servos were worn out, causing the program to halt, without sending an error-mail. Oops. I didn’t had the time to correct this fault, because the aquarium
Fish Feeder 2 Continue Reading
Let’s learn how to read a potentiometer, a type of rotating variable resistor, using Arduino’s analog input! We’ll connect up a simple circuit using a solderless breadboard and use some simple Arduino code to control a single LED. So far you’ve learned to control LEDs with Arduino’s output, and you learned to detect a pushbutton’s state (on
Read a Potentiometer With Arduino’s Analog Input Continue Reading
– The first wearable technology for blinds – Using ultrasonic waves to detect the obstacles – Notifying the user through vibrations/buzzer sound Third eye for blinds is an innovation which helps the blinds people to navigate with speed and confidence by detecting the nearby obstacles using the help of ultrasonic waves and notify them with
THIRD EYE FOR THE BLIND – an Innovative Wearable Technology for Blinds. Continue Reading
In this Instructables guide I will show you how to make your own Arduino two digit countdown timer. I made my own circuit by using the ATmega328 micro controller but this is an optional step. In this guide I will help you to make it easily on breadboard by using the Arduino uno board! We
Arduino Countdown Timer With Setup Buttons Continue Reading
These 6 easy steps will tell you how to make a wooden claw machine controlled with Arduino. Step 1: Print All of Your Pieces Either handcut or laser cut all of your pieces Step 2: Aquire Your Parts You will need 4 SG90 servos, 4 Potentiometers, and a box of half inch nuts and screws.
Handmade Claw Continue Reading
After some years of experimenting with Arduino, I decided that the time has come to share the knowledge I’ve acquired. So I here it goes, a guide to Arduino, with the bare basics for beginners and some more advanced explanations for people who are somewhat more familiar with electronics. Every step will consist of a
A Beginner’s Guide to Arduino Continue Reading
