Building robots that sense and interact with their environment used to be tricky. Now, Arduino makes it easy. With this book and an Arduino microcontroller and software creation environment, you’ll learn how to build and program a robot that can roam around, sense its environment, and perform a wide variety of tasks. All you to
Make an Arduino-Controlled Robot by Michael Margolis E-Book Continue Reading
The idea behind this post is to bring together some robot designs and trasform them in a new device with new hardware and standard software (arduino of course) and so easier to use. These robots have three things in common: a mechanical structure, the hardware and the software. While the mechanical part is necessarily different,
Robot shield for Arduino Board Continue Reading
Wex detects your location with ultrasonic sensors then follows you with his one flashing eye. His red “heartbeat” can be seen through his mouth. Step 1: Parts needed include: Arduino Two ping ultrasonic sensors Futaba s3103 servo Radio Shack 276-0016 7 color led Radio Shack 276-036 flashing red led 9 volt battery 480 ohm resistor
Wex, the One Eyed Watcher using an Arduino Continue Reading
Build a robot that responds to electrical activity in your brain—it’s easy and fun. If you’re familiar with Arduino and have basic mechanical building skills, this book will show you how to construct a robot that plays sounds, blinks lights, and reacts to signals from an affordable electroencephalography (EEG) headband. Concentrate and the robot will
Make a Mind-Controlled Arduino Robot by Tero Karvinen, Kimmo Karvinen E-Book Continue Reading
Summer Project: Arduino Scouting Robot Arduino Scouting Robot Part 1 * 12,9,5 volt power supply recharge it with a 12-volt charger keep power switch on to charge * 2 DC motors operate at 7.2V with a maximum current draw of 3 amps * 2 Digital Servos operate at 6V with a maximum current draw of
Arduino Scouting Robot Continue Reading
The Boot Bot Shield lets you burn the arduino boootloader onto a blank Atmega 328 chip. The bootloader is that magic piece of software that turns a mundane chip into the open source programmable miracle known as the arduino. Blank chips cost a few dollars less per chip than bootloaded ones. With the Boot Bot
Boot Bot Arduino Bootload Shield Continue Reading
Goals Hello all. I hope to please share a little robot that I have just finished building. There are many Ping Boat, perhaps with a tutorials and display less so without pretension, will illustrate what I could do. I gave myself the goal of realizing a robot that avoids obstacles, hence the use of Ping,
My Arduino Ping Display Robot Continue Reading
This instructable will show the game TankWars, a web based game played on an iPad that drives a real robot tank to fire lasers at a robot. When you hit the robot target, the game is updated. The tank and the target are Arduino’s equipped with RN-XV WiFly modules, the iPad is using a PHP
TankWars: A Physical Video Game using Arduino Continue Reading
Introduction The idea of this project was to design and construct a robot that consists of a body and two wheels that would be able to balance on its own. This behavior is similar how a segway (a new mode of transportation) works. Our goal was to have a working finished product – a robot
The Self-Balancing Robot using Arduino Continue Reading
My First ever Robot. It tracks objects using Infra-red sensors, and has basic AI that follows and avoid objects. I will describe the how I made this robot, and upload some videos. Version 1 (16 Dec 2011): —————–The components used ———————- I actually planned this robot before making it. I didn’t use all the parts
Wally – IR Detection Robot using Arduino Continue Reading
