This page explains how to build an RFID reader with just an Arduino (Nano 3.0 was used in testing, but other models may be compatible), a wire coil made by hand, and various affordable common components. Credits The hardware and software designs for this project are based in part on the ideas, code and schematics
DIY FSK RFID Reader using Arduino Continue Reading
f you’ve ever wanted the ability to use some form of hardware-based authentication in your projects then this is the board to do it with. The Parallax RFID (Radio Frequency Identification) reader is super easy to configure. It only takes four wires! It uses serial protocol to transfer information from RFID cards to the Arduino.
Using the Parallax RFID Reader with an Arduino Continue Reading
With this project you can build an RFID time-clock system to keep track of employees, children and more. Updated 18/03/2013 Recently I was listening to a friend who has three teenage children, of whom needed to arrive home before their parent. Unfortunately the parent needs to work all day and arrives home in the evening,
Build an RFID time-clock system using Arduino Continue Reading
In this tutorial you can make an RFID access system. It’s very simple and can be used with a wide variety of end-uses. Updated 18/03/2013 The purpose of this project is to prototype a basic RFID access system. Although it is not that complicated, this article is my response to a kit reviewed in the Australian “Silicon
Simple RFID access system using Arduino Continue Reading
The Arduino RFID lock How does it work? The Arduino RFID lock is a lock that can be opened easily, but is secure. The lock works with a server database that can register card codes. On the door there is a RFID reader connected to the lock. If the RFID reader reads a registered card
Arduino RFID Lock Continue Reading
Intro: RFID Cat Door Only the pet with the correct RFID tag can unlock this specific cat door/flap. Arduino is responsible for overseeing the process. It features a custom antenna large enough to function as a gate, enabling the animal to easily and consistently activate it. Some methods and techniques are borrowed from my previous
RFID cat door using Arduino Continue Reading
I wanted to make an easy and secure way to enter my garage. RFID was the best way to unlock my door, even with my hands full I can unlock the door and push it open! I built a simple circuit with a basic ATMega 168 Arduino chip and a ID-20 RFID reader to control
Build An RFID Door Lock Using Arduino Continue Reading
RFID tags are all over the place. They’re used in building access control systems, passports, inventory tracking . . . This instructable will show how you can use an Arduino and a few simple components (wire coil, transistor, capacitor, resistor) to make a device that can spoof an 125 KHz (low frequency) RFID tag.
Stupid Simple Arduino LF RFID Tag Spoofer Continue Reading
