I use Arduino Duemilanove With Motor Driver Shield Microcontroller ATmega168 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins 6 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 16 KB (ATmega168) or
One Touch Wardrobe using an Arduino Continue Reading
Recently I got a project from Titan industries, who were in search of something as an interactive plant pot which could bridge this gap of emotional communication, in mins this reminded me of brilliant projects done by people where the plant could could tweet and send mails and txts and on your command over the
More Humane Moisture sensor Continue Reading
Often government data sets available to us online are taken from major nearby metropolitan areas or infrastructural centers. With an easy to follow introduction to new softwares and technologies the “urban sensor kit” allows anyone to obtain location specific information and share that information with a growing community of designers, researchers, and many others. This
Urban Sensing Networks using Arduino Continue Reading
The Need: Occupational Therapy Device Occupational therapy is used in treating Traumatic Brain Injury during many phases of recovery and rehabilitation. As the patient’s condition improves, occupational therapy helps them regain skills ranging from basic self-care, to complex cognitive skills such as memory and problem solving. Occupational therapy can be helpful for individuals of all ages. Source: http://www.head-trauma-resource.com/occupational-therapy.htm According to numerous
Occupational Therapy Dexterity/Cognitive Aid Continue Reading
In this instructable, I will show you how to make a sensor that will light up more lights the closer you are to it. Step 1: Placing The Electronics This step will show you where and how to place the electronics on the breadboard Materials: 6-220 ohm resistors 3 green LED’s 2 yellow LED’s 1
How to make A light-up distance sensor Continue Reading
Goals Hello all. I hope to please share a little robot that I have just finished building. There are many Ping Boat, perhaps with a tutorials and display less so without pretension, will illustrate what I could do. I gave myself the goal of realizing a robot that avoids obstacles, hence the use of Ping,
My Arduino Ping Display Robot Continue Reading
Obstacle avoiding vehicle, continue in “3D Laser Range Finder” series ( project 1, project 2). The basic idea is the same, measuring distance using red laser pointers, CCD analog camera and Arduino UNO. Modification was made in geometry. Two lasers were set for “far field” obstacle detection, few meters in front of vehicle on left
Visual Navigator Making it MOBILE using Arduino Continue Reading
Water is a precious resource in many parts of the world, and many people rely on water tanks to supplement their water supply by storing collected rainwater or water pumped from a well or bore. But how do you measure how full a tank is? Tanks are constructed of opaque material to prevent algae growth
Water Tank Depth Sensor using Arduino Continue Reading
The incredible popularity of home weather stations shows that it’s not just farmers who are interested in the weather. Many people want to be able to track and record weather events within their local environment rather than relying on a state or national weather service that may not have adequate local details. Home weather stations
Weather Station Receiver using Arduino Continue Reading
This example shows how to use SPI communications to read data from a SCP1000 Barometric Pressure sensor, and how to then post that data to the web by using your Arduino/Ethernet Shield combo as a simple web server. Using the Ethernet library, your device will be able to answer HTTP requests by responding with just
Arduino Barometric Pressure Web Server Continue Reading
