This is my Halloween costume for the year 2013. It’s been in the works for about a year and has taken quite a few man hours to create. The screen is 14 by 15 pixels, so, pretty low resolution but it can still do some fun things. It is physically flexible in all directions, although
Pong Playing Flexible Screen on a Shirt Continue Reading
This example shows how to use the tone() command to generate a pitch that follows the values of an analog input Circuit image developed using Fritzing. For more circuit examples, see the Fritzing project page Connect one terminal of your speaker to digital pin 9 through a 100 ohm resistor, and its other terminal to ground. Power
Pitch follower using the tone() function using Arduino Continue Reading
The goal of this experiment is to convert the Arduino board into an USB keyboard plus a VGA sniffer to crack the password of a standard BIOS using the brute force attack method. There are no advantages in using this method, in fact this can be very slow and you may never find the password
Brute force attack a BIOS with Arduino Continue Reading
For some strange reason I have a fascination with various types of electronic clocks (which explains this article). Therefore this project will be the start of an irregular series of clock projects whose goal will be easy to follow and produce interesting results. Our “Clock One” will use a Freetronics Dot Matrix Display board as
Clock One – Digital plus Analog Clock An Arduino Continue Reading
This instructable will go over the steps to connect a RF module from an RROD xbox to your computer so you can use a wireless controller with your computer. ******DISCLAIMER******* DONT TRY THIS IF YOU DONT HAVE ANY EXPERIENCE WITH ELECTRONICS/SOLDERING OR COMPUTERS IM NOT RESPONSIBLE IF YOU SCREW UP…. now that we’ve gotten that
Diy Xbox wireless controller adapter for Pc Continue Reading
This is the project that got Autodesk’s CEO Carl Bass a little extra attention from the TSA on his way to MakerFaire Tokyo. Here’s an article about that… We made this as way to demo a few things you can do with our apps, 123D Circuits and 123D Design : Design circuits. Simulate the circuits online. 3D Model online and prepare
Accelerometer Dice with 123D Circuits Continue Reading
Why MIDI needs an optocoupler at all A MIDI cable carries a current loop, not a voltage. The transmitter switches 5 mA through the two signal wires, and the receiver turns that current back into a logic signal. The isolating part matters: two pieces of audio equipment plugged into different mains circuits can sit at
MIDI Input with an Optocoupler: The Receiver Circuit Explained Continue Reading
In this one, servo is programmed to be controlled by two buttons, one turns servo to the left and the other one turns it to the right. When the servo is turning, corresponding LED will be switched on to indicate the operation. Result: Because Arduino has built-in library for controlling servo, which makes servo a
How to control a Servo using Arduino Continue Reading
As a result of the questions from lekirst on this ible of my hand: LED-as-lightsensor-on-the-arduino/ and the cleaner code made by hansc44 at: Arduino-Use-LED-as-a-light-sensor/ it was time to come with a better Ible. So here it is. (I didn’t solve lekirst’s problems yet so she probably is open for suggestions) What is the idea? You might know that a LED emits light
Better LED as light sensor Continue Reading
We are a generation that love sound and light – can’t do without them really. Our most preferred time of day is night, or what we would call evening. We are particularly well acquainted with technology; doesn’t hurt these days. Our prerequisite for everything is that it be ‘cool’. Put it all together and in
Frameless Laser Harp Continue Reading
