Step 1: IR library First you need to go to this page and download the IR library. You just need to follow the read me file to install. I think that any IR remote control can do this, I’ll be using a Philips Universal one. Step 2: Parts required Parts list: 1x Arduino 1x Breadboard
Arduino – Control LEDs with a Remote Control Continue Reading
I started with an idea of what I wanted to do from the beginning but one attempt after another I finally got to where I am now. This robot can be remotely controlled from anywhere in the world and driven around the house. I can see through it’s eyes. Here is a brief run down.
4 Servo drive CellBot which can be remotely controlled using Arduino Continue Reading
I bought a solar powered garden light. The solar panel charges the batteries and when it gets dark the lights (3x LEDs) turn on until it either gets lights again or the batteries run out. It has a small amount of intelligence (turns on when dark off when light) but not enough! Time for some
Intelligent Solar Garden Light using an Arduino- Part 1 Continue Reading
I was trying to think of a quick toy I could build for my kids. I came up with this idea of an ultrasonic range finder, an Arduino, and a speaker. Basically the Arduino plays a tone out of the speaker based on the distance from the range finder. The result works pretty well and
Ping Organ using an Arduino Continue Reading
Hello everyone! Today I present you : Arduino Joystick! One day I was checking the inside of old joystick. System wasn’t that hard to understand, so I thought of making my of system. The whole build is made only by me. I didn’t check the internet pages about joysticks etc. What is it? It’s a
Cheap working homemade arduino joystick Continue Reading
This is a very low cost and simple Arduino GSM and GPRS shield. We use the module SIMCom SIM900 . It’s the cheaper module now available in the market. The module is not simple to mount by an hobbyst, so we use the Breakboard TDGGSM_900 that we presented here . You can buy the GSM
Arduino GSM shield Continue Reading
www.ArduiNIX.com presents: ArduiNIX Nixie driver shield assembly The ArduiNIX shield is a user programmable platform for driving multiplexed Nixie tube or other high voltage displays**. The ArduiNIX is open source hardware Welcome to the assembly portion of the site. Here we will take you step by step through the build process of your ArduiNIX kit. First,
Arduino Powered Nixie Tubes: ArduiNIX Nixie driver shield assembly Continue Reading
There is a saying: “If all you have is a hammer, everything looks like a nail”. Well, when I see a display, I think of clocks 🙂 I will show you here how to easily make a simple digital clock by hacking Meggy Jr RGB. This is an Arduino-programmable device, featuring an 8×8 RGB LED
Clock with Meggy Jr RGB using Arduino Continue Reading
The game Mastermind has been around a long time, and I remember getting a board version with colored pegs when I was a kid. I love this game, as it is solvable simply by pure logic. One player (or a computer/microcontroller) chooses a sequence of colors from a pool of available colors and then the
Build a Complete AVR System and Play Mastermind using Arduino Continue Reading
This project and future projects can be found at my website http://revoltlab.com/ where you can also find my blog. UPDATE LOG: NOW SUPER SIMPLE TO REPROGRAM! Easy FTDI USB interface hardware explained in step 10 Easy FTDI USB interface programming explained in step 13 NEW code uploaded works perfectly with speaker output! see step 13
The Traveling Geocache using Arduino Continue Reading
