The multi‑band SARA‑N3 is globally configurable for operation under any NB‑IoT network. Thalwil, Switzerland – November 27, 2018 – u‑blox (SIX:UBXN), a global provider of leading positioning and wireless communication technologies, has today announced the SARA‑N3, a multi‑band NB‑IoT module that supports a preliminary set of 3GPP Release 14 features (LTE Cat NB2). The SARA‑N3 is […]
deba168‘s new instructable is a weather widget: “an application that can be downloaded on your PC, laptop or a mobile device and perform the job of providing easy access to weather information” It’s an ESP8266 based weather display unit which retrieves localized weather information from http://www.wunderground.com by WLAN and displays it on a 128×64 OLED display.
This versatile embedded single board computer hits on all the main points for a low power, cost effective, Internet-of-Things (IoT) capable, and ready-to-deploy OEM board with an emphasis on data integrity. The TS-7553-V2 offers the ability to communicate seamlessly with several different networks simultaneously from a single device. Using the onboard peripherals the system can
TS-7553-V2 – IoT-Ready SBC with Reliable Storage, Cell Modem, XBee, PoE Continue Reading
Tektronix, Inc., a leading worldwide provider of measurement solutions, announced that it has redefined the arbitrary/function generator (AFG) with the introduction of the AFG31000 series. A completely new design, the AFG31000 features many key firsts including the industry’s largest touchscreen and new user interface that will delight engineers and researchers who need to generate increasingly complex
NEW TEKTRONIX AFG31000 SERIES ARBITRARY FUNCTION GENERATORS Continue Reading
Arduino had announced a new member of its family: MKRZero! This new board comes with the size of 61x25mm MKR1000 board and the power of ARM-core Arduino Zero. The ARM-core board consists of an on-board SD connector with dedicated SPI interfaces (SPI1) that make it easy to browse your files with no extra hardware. You
I²CDriver is an easy-to-use, open source tool for controlling I²C devices. It works with Windows, Mac, and Linux, and has a built-in color screen that shows a live “dashboard” of all the I²C activity. It uses a standard FTDI USB serial chip to talk to the PC, so no special drivers need to be installed.
I²CDRIVER – AN EASY-TO-USE TOOL FOR CONTROLLING I²C DEVICES Continue Reading
Maxim MAX17250 DC-DC Boost Converter is a high-efficiency, low quiescent current, synchronous boost (step-up) converter with True Shutdown™, programmable input current limit, and short-circuit protection. The MAX17250 has a wide input voltage range of 2.7V to 18V and generates an output voltage of 3V to 18V. The MAX17250 has a maximum on-time of 800ns and implements three
MAXIM INTEGRATED 2.7V TO 18V INPUT MAX17250 DC-DC BOOST CONVERTER Continue Reading
A tech Christmas decoration, created by means of Neopixel LEDs and controlled via an Arduino Micro board, that takes up a minimal amount of space. With the Xmas holidays approaching, we always try to propose a solution or another, one that is capable of combining tradition and innovation, so to avoid the usual or the
Currently I’m trying to make a working version of a radioactivity detector that uses semiconductor as a sensor. It’s a different approach than Geiger-Muller detectors or ionization chambers, more complicated, but also much more interesting. While Geiger-Muller counters can only provide information about the amount of particles in a period of time, semiconductor detectors can
At last week’s IEEE International Electron Devices Meeting (IEDM) in San Francisco (USA), imec, the world-leading research and innovation hub in nano-electronics and digital technology and Holst Centre debuted a miniaturized sensor that simultaneously determines pH and chloride (Cl-)levels in fluid. This innovation is a must have for accurate long-term measurement of ion concentrations in
