water

Automatic Irrigation System Arduino With Usb Type DC Submersible Water Pump

Automatic Irrigation System (Arduino) With Usb Type DC Submersible Water Pump

This mini project is involved to use Arduino to control submersible watre pump when soil reach below or above predefined moisture level. How it works ❓ 1. Soil moisture sensor is reading analog signal which transmit to Arduino. 2. Arduino control submersible water pump ON or OFF. Water pump operates when moisture level reach predefined […]

Automatic Irrigation System (Arduino) With Usb Type DC Submersible Water Pump Continue Reading

Design Overview

Surveying Altimeter for Water System Design

Project Background Designing a water system necessitates estimating water pressure throughout, often referred to as “head,” which denotes the vertical column of water height producing that pressure. Pump specifications typically detail the head, indicating a pump with 150 feet of head can lift water vertically up to 150 feet. Understanding the system head allows designers

Surveying Altimeter for Water System Design Continue Reading

Measuring a water tank level v2

Arduino Project 11 (2D/3D pictures) – Measuring a water tank level v2 (HC-SR04 Ultrasonic Rangefinder/Arduino Uno/1.0)

1. Introduction: I made a water level sensor a little while a go to measure the water level in my underground rainwater harvesting tank. Thanks to the Jubilee I found time to finally setup the first part of my Arduino/Xbee wireless sensor network and the first sensor node was also meant to read from this

Arduino Project 11 (2D/3D pictures) – Measuring a water tank level v2 (HC-SR04 Ultrasonic Rangefinder/Arduino Uno/1.0) Continue Reading

Scroll to Top