ESP8266 Bread Board Testing

This instructables show how to test ESP board on bread board without soldering, especially for ESP-07 and ESP-12(E) and may be ESP-03. ESP board most require 2 mm pitch connector but most bread board are 2.54 mm pitch, It need some tricks on connect between ESP board and bread board. Step 1: Preparation 2 mm pitch male pin connector with 14 or more positions, e.g. http://www.digikey.com/product-detail/en/3m ...

Read more

A DIY Smart Insole to Check Your Pressure Distribution

The smart insole collects foot pressure data in real-time. Through Thinger.io the information is fed into a system that visualizes the data. Things used in this project Hardware components Arduino MKR1000 × 1 Force Sensitive Resistor I've used Interlink model 402 × 3 OpenBuilds Wire Cable - By the Foot × 1 Resistor 10k ohm × 3 Power Bank × 1 SparkFun Triple Axis Accelerometer Breakout - ADXL345 × 1 Software ...

Read more

ESP8266 + I2S = Software-based 10-Base-T Ethernet Driver

espthernet It's pronounced "e-s-peethernet" - a party trick, not a legitimate engineering solution. ESP8266 + I2S = Software-based 10-Base-T Ethernet Driver For a detailed overview of how this project works, please see the Hackaday article. For a rough idea of what's going on, checkout the youtube video: Overall Discussion This is a relatively unreliable and coincidentally functional ESP8266 Ethernet driver ...

Read more
Scroll to top