Temperature Controled Charcoal Smoker 1

Temperature Controled Charcoal Smoker

Use an Arduino MKR1000 to maintain a constant temperature in a charcoal smoker and allow monitoring over Wifi, Things used in this project Hardware components Arduino MKR1000 × 1 5V Brushless Blower × 1 MOSFET IRF520N Driver Module × 1 100K ohm NTC Thermistors × 1 Breadboard (generic) × 1 Jumper wires (generic) × 1 […]

Temperature Controled Charcoal Smoker Continue Reading