A levitating little Death Star in Instructables invited me to the new project with Arduino. Three policies were decided and kept to differentiate it from the forerunner. Do it myself with no (or less) ready-made. Keep rotating. Make glow and blink without battery. VIDEO(1): A Levitating Sphere Rotates Glows and Blinks The detail of the project […]
A Levitating Sphere Rotates Glows and Blinks With Arduino Continue Reading
This is a guide to using the motors and sensors from the LEGO NXT set with a Parallax Basic Stamp II or BS2. However, rather than just providing schematics and sample code for the BS2, I’ll be providing some theory on how the sensors work as well. This way, someone using an arduino or other
Using NXT Components With a Micro Controller Continue Reading
A few years ago I saw an Instructable where Groover had used a pair of DVD-RW drives to make a pocket laser engraver. Inspired by the idea, driven by the recent purchase of a full-sized 50 watt CO2 laser cutter, and roused by the launch of the Microcontroller contest I took the decision to have a crack at making my own
The MicroSlice V1 | a Tiny Arduino Laser Cutter Continue Reading
A Smart Pot that has all the component inside of the pot and gives the light and humidity data to the web Things used in this project Hardware components Arduino MKR1000 × 1 Solid State Relay × 1 Jumper wires (generic) × 1 Breadboard (generic) × 1 SparkFun water pump × 1 Software apps and
Smart Connected Open Source Pot (Scopot) Continue Reading
An IOT app which make uses of ARTIK Cloud, Genuino MKR1000, DHT11 temperature and humidity sensor and MQTT protocol. Things used in this project Hardware components Arduino MKR1000 × 2 DHT11 Temperature & Humidity Sensor (4 pins) × 1 LED (generic) × 2 Software apps and online services Samsung ARTIK Cloud for IoT Arduino IDE
ARTIK + MKR1000 + DHT11 + MQTT Continue Reading
Sending temperature and humidity from Arduino MKR1000 to Artik Cloud Things used in this project Hardware components Arduino MKR1000 × 1 DHT11 Temperature & Humidity Sensor (4 pins) × 1 Software apps and online services Samsung ARTIK Cloud for IoT Arduino IDE Story Background This article describe how to use REST for sending data from
Arduino MKR1000 – DHT – Artik cloud Continue Reading
Use Arduino MKR1000 and a LCD to set the message of the day. Things used in this project Hardware components Arduino MKR1000 × 1 Adafruit Standard LCD – 16×2 White on Blue × 1 Software apps and online services Arduino IDE Story I wanted to display text on an LCD screen with the MKR1000.
MKR1000 Message of the Day Continue Reading
Automate your Christmas tree and get notified when motion is detected around the tree! Things used in this project Hardware components Arduino MKR1000 × 2 PIR Motion Sensor (generic) × 1 Jumper wires (generic) × 1 Relay (generic) This is a really easy relay to use, plug and play! http://www.digital-loggers.com/iot.html × 2 Software apps and
MKR1000 Christmas IoTree with Cayenne Project Builder Continue Reading
While you can connect your analogue input/output devices to Arduino very easily, it is not so easy with Raspberry Pi (Raspi). There are no analogue GPIO pins on Raspi; all GPIOs of Raspi are digital. Circuit diagram of an analogue sensor on Raspi However, simple resistive-type analogue-input devices can very easily be connected to Raspi
Analogue Input on Raspberry Pi Continue Reading
Projects or schematics, drawings that will work when preparing pcb Atmel AVR Microprocessors Information Tags for “Share” drawings directly on Atmel microcontrollers. Colored linking expansions are more comprehensible for those dealing with Atmel Series… Electronics Projects, Atmel Arduino Colored Connection Chart “arduino projects, “ Projects or schematics, drawings that will work when preparing pcb Atmel AVR Microprocessors Information Tags
ATMEL ARDUINO COLORED CONNECTION CHART Continue Reading
