Sometimes when you’re testing a sensor or debugging a value in an Arduino project, you want to see something other than numbers flying by in the Serial Monitor. However, you want to get the sensor working quickly, and you don’t want to take the time to write code to graph it or display it in
Graphing values in Arduino, the EASY Way! Continue Reading
The next board I want to show you is the ADJD-S371 Color Light Sensor Evaluation Board from sparkfun. It emits light and analyses the reflected color spectrum. The board can be controlled via I2C. The sleep and xclk pins were not used in this example. I found a really nice tutorial describing how to connect
RGB Color Sensor on Arduino Continue Reading
I was always impressed by the Daft Punk Coffee Table. Being able to light up a bunch of LEDs and flash them in patterns has so many applications. It was one of the reasons why I bought an Arduino seeing how it could control a matrix of LED lights.This is my attempt at building the
Daft Punk LED Matrix Breakout Board Continue Reading
INTRODUCTION This manual will show you how to use each of the components in the kit, and give you software Sketch examples for each one. Then you can combine some components to make examples of Automatic Systems such as a lighting controller. You’re probably here because you’re interested in MAKING things with Arduino. The
LEARN! ARDUINO – A HANDS-ON APPROACH Continue Reading
I don’t get up at the same time every day, so I thought it’d be nice to have an alarm clock that would drag me out of bed at different times on different days. That was the initial idea: things got out of hand, of course, and this is the result. What it does: 1)
Alarm Clock Overkill Using Arduino Continue Reading
I’ve had a cuecat barcode scanner sitting around for over 10 years. Basically it connects to a PS2 port (apparently there is a USB version) like a keyboard and spits out a barcode when scanned. Nice!. The annoying thing is that it is “encrypted”. What I set out to do is; – unencrypt the barcode
Arduino and CueCat barcode scanner Continue Reading
This has been done before. There are several good ways to do it: most use either a 555 timer chip and decimal counter chip, or an Arduino. Stefan and I used an Arduino (Boarduino, technically) which limited our scanner to 14 LEDs. No problem — 14 gives a nice scanning effect! Here’s how we wired
Cylon Pumpkin Using Arduino Continue Reading
QR codes are addicting. Smartphones are smart enough to read them from virtually any angle or orientation. But imagine taking it a step further. I had dreams of a digital LED array that I could program with QR codes, and I wanted it really big! I used 16 matrices to create the QR code that
Build Your Own Programmable LED Matrix Continue Reading
Once you’re getting some values from sensors, for example using Arduino, (see my previous instructable), sometimes it’s nice to see the sensor data in a graph. Here’s how in only a few steps! I made this particular Instructables using a sonar sensor (XL Max Sonar EZ/AE) but you can do it with any data values
Visualize data from sensors using Arduino + coolterm Continue Reading
This is the second part of our BaW-Bot (Bells-and-Whistles Bot) build – 5 separate instructables that look into different Arduino-related technologies, combining to create a Bot with all the bells-and-whistles. Part 1: Build an Arduino on a Board Part 2: Build the motor-controller & body Part 3: Adding Sight and Touch Part 4: Blinging up
BaW-Bot Part 2: Build the motor-controller & body Continue Reading
