Arduino Powered Micro Aquaponic System with Pi Camera and Twitter Feed We are creating an automated aquaponic system with mobile updates via Twitter. Sensors and motors will be controlled from an Arduino while the entire system, including mobile updates, will be orchestrated by a Raspberry Pi. Tweets include pictures, sensor data, and system-critical updates. Original […]
Aqua Garduino Mini @hydroFishAqua82 Continue Reading
This is my second instructable. I just had a mood of making a digital watch. But wanted to make it a learning process. I already had a sanguino i could have easily used that Atmega644 chip. it would have been more than enough. But i wanted to try burning a Arduino bootloader and see if
Arduino 7 segment Displays Digital Clock With Charlieplexing LEDs Continue Reading
Hi, everyone, i would like to introduce how i remake my mosquito killer here. With this remaking, my mosquito killer become “Smart”, and really facilitate my life. I rented a room in very remote place to save my money, in the summer, the biggest trouble I come across, is the mosquito.These annoying mosquitoes always woke
Remake the Mosquito Killer using Arduino Continue Reading
Recently a family member had his furnace fail while he was away from his house for a long period of time in the winter. His pipes burst and caused quite the mess. This project describes a temperature sensor that broadcasts the temperature in his house to the pachube data logging website. This allows him to check on
House Temperature Monitor using Arduino Continue Reading
The basic idea was to create color organ / spectrum analyzer on arduino board, trying to minimize quantity of external components, like analog filters, LED display drivers, etc. Spend a lot of time in search on internet I was able to find only two ! project , which implemented FFT in order to solve a
Spectrum Analyzer, Arduino project with FFT algorithm Continue Reading
Hey everyone, I finally finished my touch panel for my bedroom wall and am here to show you how i made it. Unfortunately its not installed in my wall yet as I might be moving and don’t want to make anymore holes in my walls, but its coming with me and has already proven itself
Arduino Touch Screen Room Control Continue Reading
This is a relatively simple controller for controlling equipment in your home. At the moment I control my central heating, security and lighting. By sending commands from my home computer. My homeeasy central heating controller hack. http://www.instructables.com/id/BampQ_homeeasy_home_automation_central_heating_c/ I am also able to login remotely from the internet to control the equipment at home connected to
Arduino Home automation Continue Reading
Overview: This instructable will cover the building process of an 4x4x4 LED Cube. I will be using an Arduino to control the LEDs. Since the Arduino (Freeduino) has a total of 20 pins (including the analog pins) we will not need to have any multiplexing or shift registers. I will take you though what i
Arduino 4x4x4 LED Cube Continue Reading
I wanted to create something for my wife as a present and this is what I came up with. This is a dark activated color changing night light. It has a sensor that can tell when the room light is turned off. This then will light a RGB LED and slowly fade through different colors.
Color Changing Night Light with ATtiny using Arduino Continue Reading
Squirt is a motion activated water cannon using Arduino. This was designed for use in the garden but as it’s winter we tested it in the bathroom. It works! True motion tracking is expensive and complicated so this system activates when the victim moves into range and randomises the position of the cannon and the
Squirt – Arduino, motion activated water cannon Continue Reading
