A Reef / Saltwater Aquarium controller based on an Arduino Mrk1000 and controlled remotely by an Universal Windows Platform app. Things used in this project Hardware components Arduino MKR1000 × 1 Adafruit Perma-proto board full size × 1 Adafruit I2C logic level converter × 1 Adafruit RGB LCD Shield Kit I2C 16×2 × 1 SainSmart […]
Reef Controller Continue Reading
Use an Arduino MKR1000 to maintain a constant temperature in a charcoal smoker and allow monitoring over Wifi, Things used in this project Hardware components Arduino MKR1000 × 1 5V Brushless Blower × 1 MOSFET IRF520N Driver Module × 1 100K ohm NTC Thermistors × 1 Breadboard (generic) × 1 Jumper wires (generic) × 1
Temperature Controled Charcoal Smoker Continue Reading
Many fun environmental sensors need a hardware interrupt. With the MKR1000, you no longer need to choose! You get I2C, analog ins too! Things used in this project Hardware components Arduino MKR1000 × 1 MOD-1016 Lightning Sensor × 1 DFRobot MQ-9 Gas Sensor × 1 Adafruit Humidity and Temperature Sensor × 1 Adafruit Pressure/Altitude/Temperature Sensor
Multiple mode Environmental Sensor Deck with MKR1000 Continue Reading
Water quality data monitoring for swimming pools, fish aquarium and more! Things used in this project Hardware components Arduino MKR1000 × 1 Jumper wires (generic) × 1 DFRobot pH Meter × 1 Resistor 4.75k ohm × 1 Temperature probe × 1 Software apps and online services Samsung ARTIK Cloud for IoT Arduino IDE Story I.
Water Quality Monitoring Using MKR1000 and ARTIK Cloud Continue Reading
The objective of this tutorial is to learn how to use the DHT22 sensor with Arduino uno. The room temperature and humidity will be printed to serial monitor and also will be displayed to the LCD 4×20 in Proteus ISIS. DHT22 is simple basic, cheap digital temperature and humidity sensor. It uses a capacitive humidity
Temperature and Humidity monitoring with DHT22 sensor Arduino Uno R3 Continue Reading
An AC (Air Conditioner) which was once considered to be a luxury item and was only to be found in big hotels, movie halls, restaurants etc… But, now almost everyone has a AC in our home to beat out the summer/winter and those who have it, worry about one common thing. That is their high
Automatic AC Temperature Controller using Arduino, DHT11 and IR Blaster Continue Reading
Hardware components: MediaTek Labs The MediaTek LinkIt™ Smart 7688 platform × 1 Everything ESP ESP8266 ESP-01 × 1 Arduino Nano R3 × 1 Atmel ATTiny85 × 1 DHT22 Temperature Sensor × 1 Servo (generic) × 1 Software apps and online services: Arduino IDE STORY Winter is coming When my wife and I had our first child
Zoned Climate Control with MediaTek’s LinkIt™ Smart 7688 Continue Reading
A Thermistor is a thermal-resistor. It’s just a simple device that changes it’s resistance based on temperature. If the LRD/Photoresistor is day of of arduino class. The thermistor should be day 1.01. (Can I do that?). If you need precise temperature readings, this is not the part for you. Check out the DS18B20, TMP102, or
Simple Temperature With Thermistor + Arduino Continue Reading
The BMP180 is a new generation digital barometric pressure and temperature sensor from Bosch Sensortec. In this tutorial, we will briefly review this device and describe how to interface it with an Arduino Uno board for measuring the surrounding temperature and pressure. We will also discuss about retrieving the sensor altitude from its pressure readings. Experiment setup
Using BMP180 for temperature, pressure and altitude measurements Continue Reading
In this project, we are going to make an Arduino Temperature logger that will get the temperature value from the LM35 temperature sensor and the time from the DS3231 Real Time Clock module. Then we will store these values in the SD card file using the mini SD card Module. After that, we will access
How to Make an Arduino Temperature Data Logger Continue Reading
