Posts by Ibrar Ayyub:
Marble Disorder – a marble maze simulator with tilt switches using Arduino
Posted on: 19 Apr 2013
Marble Disorder is a borderline case of Marble Madness 🙂 It simulates a marble maze by sensing the box’s orientation with 2 tilt switches. Stop the press: there’s a new and more intuitive version that doesn’t require the spin knob (See video). I keep documenting the original version below for historical purposes, but don’t watch this – […]
Dogduino:The Automatic Dog Feeder using Arduino
Posted on: 19 Apr 2013
Tired of having to find the dog food to feed the dog? Tired of having to get up early so your dog doesn’t attack you for his food? Are just plain lazy? If you answered yes to any of these questions, this instructable is for you. Powered by the intelligent Arduino, this gadget will automatically […]
Arduino EMF Detector
Posted on: 19 Apr 2013
Here’s a small, quick project you can do with an arduino, the EMF Detector! Step 1: Circut All you need for this project is 10- 330 ohm resistors 10- LED’s 1-3.3m resistor 1-Solid core wire (this will serve as the probe) breadboard, wires, battery & connector for arduino to make it portable Step 2: Hooking […]
High Heel Massage using an Arduino
Posted on: 19 Apr 2013
My project is to make a heel (shoe) that senses when your foot is tired and then eases the pain. I will have a force sensor measure how much pressure is on your foot for 3 minutes. If the pressure is at a certain measure for 3 minutes, then a vibrator will go off and […]
Turing Alarm for Arduino
Posted on: 18 Apr 2013
NOTE: This Instructable is currently incomplete. I will finish it before September 19. I started this project after seeing Nick Johnson’s Turing Alarm clock. I found that the PIC chip he used was a little too advanced for me, so I decided to use the Arduino microcontroller. The original project by Nick Johnson can be […]
Arduino Electronic Dice using random numbers
Posted on: 18 Apr 2013
This instructable will show you how to make an electronic dice with minimal experience using 7 LEDs, resistors, jumper wires, and of course the arduino (or arduino clone). I wrote this instructable for anyone to easily follow along and learn more about the arduino. Questions are welcome and will be answered as soon as possible. […]
Arduino + fischertechnik TX-C – Connecting I2C True Colour Sensor
Posted on: 18 Apr 2013
Colour reading is a real issue for industrial models. I’ve been working on it for more than 12 months now, since December 2009. After many months of hard work, • starting with the standard colour reader (season 1 ) with features a red LED, • adding extra light from bulb lamps (season 2 ), • […]
Flicker up to 6 LEDs with Arduino
Posted on: 18 Apr 2013
Hi there. Christmas is coming closer, and I was wondering if I could put some candles in my room to get in the “christmas mood”. But after a friends house burned down of christmas tree candles, I don’t want to burn real candles into my room. So why don’t let the Arduino light for you?! […]
Analog Clock And Temperature sensor On An Oscilloscope using Arduino
Posted on: 18 Apr 2013
Scopeclock is an easy to use hardware to make your X-Y capable analog oscilloscope more useful .Using this simple to use hardware you can convert your analog oscilloscope into a scope clock.This project was me and my friend kshitij gupta at CEDT nsit under the guidance of Prof. Dhananjay V.Gadre. Scope clock has two modes […]
Arduino Mega-ISP Shield
Posted on: 18 Apr 2013
Use this shield to re-burn the bootloader for any arduino. You can always make one on a breadboard, but having a shield is great. This is great for people who works with lots of arduinos. You can also use it with AVRDUDE. I will have a parts list coming soon… (this instructable will be under […]
