Ladyada and pt had an old NeXT keyboard with a strong desire to get it running on a modern computer. These keyboards are durable, super clicky, and very satisfying to use! However, they are very old designs, specifically made for NeXT hardware, pre-ADB and pre-USB! That means you can’t just plug the keyboard into an ADB or […]
USB NeXT Keyboard with an Arduino Continue Reading
Finished Product! Here’s the finished DAC! it was a very fun project and very fulfilling to make something that I actually use everyday. Overall the audio specs aren’t anything amazing, but it definitely is an improvement on the built in audio of my computer. The Schematic Here is the electrical schematic of the DAC, it
My DIY USB DAC Continue Reading
Since the release of V-USB, dozens of projects have been made that allow an AVR to communicate over USB. USB data signals are supposed to be in the range of 2.8 to 3.6V, so there are two recommended ways to have an AVR output the correct voltage. One is to supply the AVR with 3.3V
USB interfacing for AVR microcontrollers Continue Reading
This foot pedal plugs into the Arduino case which plugs into your PC via microUSB cable. Arduino microcontrollers can easily be used to power fun projects like robots and even sending tweets to Twitter but they’re versatile enough to turn up in the strangest of places – like under your feet. We had a question
Arduino project: USB foot-operated mouse switch Continue Reading
I have a device which provides a USB port. If I attach it to a Windows PC it is recognized as a “CP2103 USB to UART Bridge Controller”. According to the device documentation, it should communicate in serial format at 38400bps.I have to talk to this device with a atmega microcontroller. Since the USB pinout
Hey, sorry everyone, I know it’s been a while. But I hope this post will make up for that! Anyone who has done embedded programming knows that an easy way for microcontrollers (like arduino) to connect to a PC is through a serial connection. Unfortunately, not many computers have a serial port these days, and
CH340G – alternative USB to serial IC Continue Reading
BEAVERTON, Ore., Nov. 4, 2014 /PRNewswire/ — Tektronix, Inc., a leading worldwide provider of test, measurement and monitoring instrumentation, has introduced a new class of affordable spectrum analyzers based on a USB architecture with a list price of just $3,490. The new RSA306 sets a new price/performance threshold for spectrum analyzers and features a broad 9
Tektronix USB Spectrum Analyzer Continue Reading
The USB Specification Evolves Other than generous helpings of coffee, what helps industry decrease time to market, drive down cost, and focus more of the design cycle on innovation? Hint: standardization. By defining protocols and operating characteristics, standards have impacted all aspects of technology: device package sizes, pin outs, data and communication interfaces, software drivers,
USB battery charging rev. 1.2: Important role of charger detectors Continue Reading
Exar has announced a new family of USB to serial bridge devices for industrial applications. The XR21B142x family interfaces with RS-232 or RS-485 serial networks. The XR21B1420, XRB21B1422, and XRB21B1424 provide 1, 2, and 4 UART channels respectively. The XRB21B1421 provides a single channel UART and uses the native operating system HID (Human Interface Device)
Exar’s USB serial bridge devices Continue Reading
One of the most fun and useful projects on instructables is to create your very own solar USB/ iPhone charger. They’re not overly difficult to make, nor are the parts overly expensive or hard to find. For the most part they do a rather good job of charging up small gadgets. Mostly. The big flaw
Lithium Battery Solar USB – iPhone – Arduino Charger Continue Reading
