Hello all ! With this instructable I will be writing and documenting a series of projects mentioning and exploring the various hidden ( rather unexplored ) features of the tiny ESP8266-01 WiFi Module. Did you know that the ESP8266-01 supports I2C communication? Yes it is true, this little module lying unattended in one corner of […]
I2C With the ESP8266-01 !? || Exploring ESP8266:Part 1 Continue Reading
This sketch is used by Exercise: MPU6050 IMU I2C Module. Main Source Code The main code is in MPU6050_DMP6.ino. // I2C device class (I2Cdev) demonstration Arduino sketch for MPU6050 class using DMP (MotionApps v2.0) // 6/21/2012 by Jeff Rowberg <[email protected]> // Updates should (hopefully) always be available at https://github.com/jrowberg/i2cdevlib // // Changelog: // 2013-05-08 – added seamless
Arduino Sketch MPU6050 DMP6 Continue Reading
I have worked most of my adult life with patients with vision problems in Alaska and pondered building a helpful device that would enable a more defined way of metering out fluids in a kitchen if users had no central vision. There are devices already for defining the limits of a cup with two wires
WetRuler–Kitchen Helpers for the Visually Impaired Continue Reading
This sketch is used by Exercise: Adafruit PWM I2C Module. Full Source Code The main code is in Adafruit_PWM.ino. /*************************************************** This is an example for our Adafruit 16-channel PWM & Servo driver PWM test – this will drive 16 PWMs in a ‘wave’ Pick one up today in the adafruit shop! ——> http://www.adafruit.com/products/815 These displays use I2C
Arduino Sketch Adafruit PWM Continue Reading
Hello makers!! For those who already know my Instructable “Space Mouse” https://www.instructables.com/Space-Mouse-With-Ard… there is now an extension for it! The Creative Console!! I designed this console to extend the functionalities of the space mouse keeping the prime concept: keep it cheap, customizable and 3D printable! This project has been challenging, but after all that is
Creative Console for Space Mouse! Continue Reading
This sketch is an Arduino program which acts as an simplified hardware I/O server using a simple readable message protocol. The intent is to provide an easily modified and extended real-time embedded hardware controller which can interface easily with a non-real-time client running on a laptop or Raspberry Pi. The following documentation was extracted from
Arduino Sketch OneInOne Out ASCII Continue Reading
This sketch is used by Exercise: Input Hysteresis. Full Source Code The full code is all in one file InputHysteresis.ino. // InputHysteresis.ino : Arduino program to demonstrate a simple single-state hysteretic response. // Copyright (c) 2014-2015, Garth Zeglin. All rights reserved. Licensed under the terms // of the BSD 3-clause license as included in LICENSE. // The
Arduino Sketch Input Hysteresis Continue Reading
Do you ever find it a hassle to manually level your 3D print bed every time you make a print? Even seasoned 3D printing pros need to level the printbed after every couple prints. We’ve created a device that helps tremendously improve this procedure. This project, codenamed OmniLevel, helps you level your 3D printer bed
3D Print Bed Leveling Tool Using M5StickC Continue Reading
In this instructable, I’d like to share how to build a vertical plotter that can draw texts and images on the blackboard. Let’s getting started. Time-lapse video with hatch fill extension from Inkscape. Step 1: Bill of Materials Main components: 1pcs x Arduino Mega 2560. 1pcs x RAMPS 1.4 Controller. 2pcs x A4988 Stepper Driver Module. 2pcs x Stepper
BLACKBOARD V-PLOTTER Continue Reading
I’ve been a fan of Commerical Nanoleaf available in the market but their cost is pretty high so I try to make my own version by designing a WS2812B LED strip and connecting three of these strips together in a triangular shape to make a Nanoleaf like setup. The goal here was to make a
PCB NANOLEAF/HEXALEAF Continue Reading
