About: Ibrar Ayyub

Always at the forefront of embedded connectivity innovations, FTDI Chip’s latest series of multi-channel USB interface ICs. These have the capacity to deal with next generation power requirements, as larger items of hardware start to make use of the protocol. Available in both 2-channel (FT2233HP) and 4-channel (FT4233HP) versions, the new Hi-Speed (480Mbits/s) devices have serial UART (RS232, RS422 or RS485) […]

The very first project of my channel is about controlling an RGB LED using annoying push buttons…. I feel that the project was not a good one to learn about micro-controllers, because most of the micro-controllers uses are not fully utilised in that project…. So, This is definitely the time for an upgrade, and upgrade means letting […]

It’s been a while since I’ve published my last Instructables. I’m back, and I’m 3D-printed-powered! Enjoy this mini retro arcade machine. It’s literally my first complete end-to-end 3D-printed project: I made the design, printed it, assembled the electronics, programmed it, and now to the tutorial 🙂 This guide will be updated soon with instructions to […]

This instructables show how to use a tiny sweet box to make a NES console. Supplies TTGO T7 v1.3 https://www.aliexpress.com/af/Ttgo-t7-v1.3.html?d=… 1.54″ ST7789 IPS LCD https://www.aliexpress.com/af/1.54-st7789.html?d=y… Lipo 303040 https://www.aliexpress.com/af/lipo-303040.html?d=y… MAX98357 I2S DAC audio breakout board https://www.aliexpress.com/af/max98357.html?d=y&or… 10*18 mm speaker https://www.aliexpress.com/af/1018-speaker.html?d=… Thin Prototype PCB https://www.aliexpress.com/af/lipo-303040.html?d=y… Four 6.2*6.2*5 mm Tactile Switches https://lcsc.com/product-detail/Tactile-Switches_D… Two 12*12*4.3 mm Tactile Switches https://lcsc.com/product-detail/Tactile-Switches_D… […]

Join me in creating ground effect lighting for my scooter using a bluetooth microcontroller and addressable LED strip. For this project I’m recycling two bits of pixel strip leftover from my old POV bike project tutorial. These are APA102s or DotStars, but you could totally use Neopixels for this project, I just happened to have […]

If you are new or experienced in DIY electronics, you probably know about the Arduino. Arduino is an excellent option for microcontrollers; its products are reliable, open-source, affordable, and efficient, with high flexibility. The list shown displays the extensive variety of options available in Arduino projects. The list includes a range of project ideas; some […]

Dear friends welcome to another Instructable! Today we are going to build an Internet Radio device with a big 3.5” display using an inexpensive ESP32 board. Believe it or not, we can now build an Internet Radio in less than 10 minutes and with less than 30$. There is a lot to cover so, let’s get started! […]

Like many older people, my mom lives by herself. She likes her lifestyle but sometimes it gets a bit lonely. We talk on the phone a few times each week but it’s the in-between times where she could use a little emotional boost. A simple “I’m thinking of you” would be enough to make her […]

Precision sharpening skills aren’t developed overnight! Here’s a high-tech way to monitor your knife angle during sharpening, with the help of an absolute orientation sensor and bluetooth microcontroller. This project is a collaboration with Alex French Guy Cooking! This is an intermediate level Arduino project, so if you’re an ultra-beginner or a bit rusty, brush up […]

This is a Arduino RC car, originally based off of a project made by Owen_soo. It is very maneuverable, able to do quick turns, go backward and forward with just a flick of a switch. This was originally just going to be a very basic RC car that can go forward and turn right or left. […]