Posts by Ibrar Ayyub:
Arduino Bluetooth Car Controlled by Labview
Posted on: 15 Jun 2026
This is a Arduino RC car, originally based off of a project made by Owen_soo. It is very maneuverable, able to do quick turns, go backward and forward with just a flick of a switch. This was originally just going to be a very basic RC car that can go forward and turn right or left. […]
The Simplest Buzzer Tutorial; Using Arduino
Posted on: 15 Jun 2026
Hey Makers, Lets make a Simple Quiz Buzzer using Arduino! Step 1: What We Can Do With It? What we can do with it? >Quiz Game Buzzer >Play Tunes and lots more…………. Step 2: Things Required >Arduino Uno (Buy From Amazon.in) (Buy From Amazon.com) >Buzzer (Buy From Amazon.in) (Buy From Amazon.com) >Switch (Buy From Amazon.in)(Buy From Amazon.com) >100ohm Resister (Buy From […]
RFID Door Lock With Arduino
Posted on: 15 Jun 2026
Here we are with the classic RFID door lock. It’s classic in that whole, “We live in the future and take it for granted at this point” sense. In this tutorial, we will set up a door latch that can be opened with the swipe of an RFID Tag! We will program a list of […]
Upright Laser Harp
Posted on: 15 Jun 2026
Laser harps are musical devices with laser beam “strings.” When the beam is blocked, a note is played by the instrument. Usually laser harps have the beams travel vertically in the shape of a fan or vertical lines. In this project, I built a laser harp with stacked laser beams that propagate horizontally. The beams […]
Berry Racer – a Game Programmed in Arduino and Played on a Custom PCB
Posted on: 15 Jun 2026
Berry Racer is a game that I came up with and programmed using Arduino’s Software. The game is run on a Teensy microcontroller which is connected through a custom PCB (Printed Circuit Board) to a Screen, a Joystick, four buttons, and a piezo speaker. The board can be powered through the micro USB port on […]
ARDUINO PH METER
Posted on: 15 Jun 2026
In this project, we will be making a benchtop pH meter using the gravity analog pH circuit and probe from Atlas Scientific and an Arduino Uno. Readings will be displayed on a liquid crystal display (LCD). MATERIALS 1 – Arduino Uno 1 – Gravity analog pH sensor 1 – pH probe 1 – 20×4 LCD module 1 – 158x90x60mm Enclosure […]
DIY Geiger Counter With an ESP8266 and a Touchscreen
Posted on: 15 Jun 2026
I designed and built a Geiger Counter – a device that can detect ionizing radiation and warn its user of dangerous ambient radiation levels with the all-too-familiar clicking noise. It can also be used when scouting for minerals to see if the rock you found has Uranium Ore in it! There are many existing kits […]
Programmable Macropad V2
Posted on: 15 Jun 2026
In this Instructable I will walk through how I build my new and improved Macropad. I made one a while back and it has always had some things I would like to improve on it. The main one being the location of the state LEDs. When redesigning the case I figured why not take a […]
The Brachistochrone Curve
Posted on: 15 Jun 2026
The brachistochrone curve is a classic physics problem, that derives the fastest path between two points A and B which are at different elevations. Although this problem might seem simple it offers a counter-intuitive result and thus is fascinating to watch. In this instructables one will learn about the theoretical problem, develop the solution and finally build […]
How to Make a Self-Watering IoT Planter With a Mason Jar and an ESP32!
Posted on: 15 Jun 2026
Introduction: On one of my weekly pilgrimages to Lowes (as any devout Kansan does), I found a sad little plant in the Gardening Department: a Janet Craig Compacta. The poor little guy looked lonely and dehydrated. We clicked right away and immediately I knew I had to take him under my wing. There was one […]
