Posts by Ibrar Ayyub:
Barcode Reading using Roborealm Output on Arduino LCD
Posted on: 26 Apr 2013
This Instructable shows how to create a Barcode Reader using only a webcam together with Roborealm and Arduino. The webcam used in this demonstration is the Logitech Quickcam and the LCD screen is labelled, JHD162A. What you need for this project: 1. Arduino UNO 2. LCD 3. Roborealm 4. Potentiometer Step 1: Coding the Arduino […]
Arduino Wireless Animatronic Hand
Posted on: 26 Apr 2013
BTW!!!!! This instructable is awsomeeeeeeThis is a very simple but at the same time a very hard project depending on your skill level. Lets get to building! What this is, is a wireless animatronic hand that doesn’t need a computer to operate. The user wears a control glove and can control the animatronic hand precisely. […]
Arduino-based line follower robot using Pololu QTR-8RC line sensor
Posted on: 26 Apr 2013
UPDATE FEB 2012: This guide is featured on Adafruit’s blog http://www.adafruit.com/blog/2012/02/14/arduino-based-line-follower-robot/ This is Faz3a II, my first line-following robot, which I also hope to use for maze-solving. I used the Arduino Uno, Adafruit motor shield, Pololu’s QTR-8RC line sensors and motors. You can build a cheaper and lighter version of this robot using the Atmel […]
Arduino Bluetooth Serial Connections
Posted on: 26 Apr 2013
This is an introduction on how to setup, make a basic connection, and send data to and from an Arduino using Bluetooth! Bluetooth is great for transmitting data over medium distances and what’s more, Arduino just treats it like a serial data connection. This means that we can use the Serial Library. That’s a nice […]
Arduino controls cheap RC car transmitter
Posted on: 25 Apr 2013
OBJECTIVE Cheap Chinese RC toy cars can be had for about 5 Euros in the local market. The wireless brains behind the majority of these cheap RC toys is a pair of very cheap ICs the TX2 and the RX2. Yup, that’s what they are called. So this tutorial is focused on the TX2/RX2 based remote controlled toys. […]
Arduino Watch with Nokia 3110 screen
Posted on: 25 Apr 2013
My goal for this project is to make a watch with selectable dials, stopwatch and millidays. This idea started with an Aprils fools prank about metric-time. (http://www.youtube.com/watch?v=K35xG1buyFA) First I wanted to make a metric clock but soon this idea evolved from a metric watch into an open course watch. I knew that it would be […]
Simple 2-way motor control for the arduino
Posted on: 25 Apr 2013
When I say simple, I don’t mean use a speed control. But control the motor directly without any external circuitry. Here’s how: How this came about: I recently was working on an instructable about charlieplexing with an arduino. And I was wondering if the same principle would work with motors to some extent. So I came […]
Arduino Controlled Motion Sensor
Posted on: 25 Apr 2013
In this Instructable, I’ll be explaining how to build a motion activated alarm! It uses an Arduino microcontroller, a PIR (passive infrared) sensor, and a type of alarm. You can use an LED indicator, a buzzer, or a piezo. That’s the easy part. I will also be showing how to display to a character LCD […]
Arduino LCD Twitter display
Posted on: 24 Apr 2013
a.k.a. the gratuitously complicated bidirectionally communicating Arduino-based scrolling Twitter display and notifier. —- This project was mainly done as an excuse to learn how to use character LCD displays with my Arduino, and figure out how to make a bidirectional serial protocol. One major design goal was that the hardware would take user input and […]
Very Simple Arduino Electric Lock
Posted on: 24 Apr 2013
This is a instructable for a very simple Arduino controlled electric lock. The key idea here is to be very simple as this was more of a proof of concept prototype type of thing. The Arduino is used as a switch to control the lock itself, and is set to interface with a Computer. The […]
