About: Ibrar Ayyub

This laser game is a simple project that utilizes an Arduino mini. All target boards have an Arduino, sensors, and servo control ports. Shooting the target center triggers the servo and the board falls flat. Step 1:What you need Step 2: Soldering Assembly all components on the PCB. Step 3: Prepare the target board Cut […]

This is an inexpensive, DIY, Arduino-powered oneironautics device that allows users to alert themselves when they are in a deep dreamstate, without waking up. In other words, this machine will tell you when you are dreaming, while you are dreaming. Why is this such a big deal? Because, this is the first step to achieving a […]

So have you heard of sous vide? Well, this Lazy Old Geek (LOG) hasn’t or hadn’t. http://en.wikipedia.org/wiki/Sous-vide It’s French. So it’s kind of like boil-in-a-bag only you don’t boil it. The equipment can be rather expensive. http://www.sousvidesupreme.com/Shop_Online/SousVide_Supreme_Demi/Department.aspx?DeptID=3&&AdID=245&gclid=CN7PyM6uw7cCFWNp7AodomkA6g I thought that was rather expensive for a tender steak, so I decided to make my own. There […]

As an artist, sometime I created an art pieces without planning ahead what I want to draw or paint, just want to add colors or lines onto the drawing or canvas, and never think of the outcome of the piece. Let’s our own instinct and subconscious leading away! Then I thought, “What if I am using electronic components, […]

Vehicle Tracking System becomes very important now days, especially in case of stolen vehicles. If you have GPS system installed in your vehicle, you can track you Vehicle Location, and its helps police to track the Stolen Vehicles. Previously we have built similar project in which Location coordinates of Vehicle are sent on Cell Phone, […]

I found a pressure sensor matrix that we could adapt to a pressure sensor patch on the stomach of the women in labor on this webpage (see below). It gives instructions how to build a pressure sensor by using two pieces of cloth and conductive thread! If I understand it right, you just have to […]

This xylophone uses the Arduino Uno and a multiplexer to identify when one of eight keys are struck, and play that sound via midi sound on a computer. An optional part of the instructions also allows each key to light up with two LED lights at the same time the xylophone is struck. These steps […]

A really fun project sent into us by Thomas Meghe. He’s translated it all from his native French, which is a technical achievement itself. If you’d like to see the original, you can find it here. Bored of your favorite Twitter client ? No problem, here’s the solution ! In this post we are going […]

u-blox, a global provider of leading positioning and wireless communication technologies, has announced the SARA-N3, a multi-band NB-IoT module that supports a preliminary set of 3GPP Release 14 features (LTE Cat NB2). The SARA-N3 is available in two variants: one dedicated to China and another that can operate across multiple bands on any NB-IoT network globally. […]

Navigation LCD_driver.c LCD_driver.h LCD_driver.h.out ball12d.php bojia.c bojia.c.out chenb.php doyler.php ellwangerk.php foo.txt frickd.php gamblec.php hurleyg.php keattsd.php littletonj.php panuskip.php parsonstc.php schrodere.php Here is keattsd Bluetooth SNES Controller Supplies I used the following supplies for my mini-term project: Arduino Uno microcontroller RN-42 bluetooth module USB A to B cable One 330-ohm resistor Five alligator clips One breadboard Two […]