About: Ibrar Ayyub

Their are many people who are struggling to make projects that are needed for their daily needs. One of the major example is none other than room automation. Even though many of the room automation setup cost a little bit higher can’t we make it little bit cheaper. Can’t we make it using the Arduino’s […]

Arduboy is an open source credit card size gaming console that has an active community not only on its software where alot of people develop their own game for the platform but also on its hardware where there are also alot of people came up with their own custom arduboy hardware. I personally cannot afford to buy the […]

Gliderscore is a program developed by Gerry Carter that not only scores a model plane flying competition, but provides timing for the various flying tasks One feature of Gliderscore Timer is that it outputs a Serial ASCII string that contains the countdown time, the group , the round and whether it is working time or […]

This project is bases on the internet radio by Ed Smallenburg. He did an awesome job in creating a working internet-based radio. He shared his coding and hardware on the world wide web so that people like you and me can learn from it. He shared his build on GitHub using the copyleft license. (It […]

Hello everyone ! Today I’m going to show you how I built this little kitchen scale during this lockdown ! It can measure weights up to several kilograms, has an included battery, a nice display and can even be turned into a connected scale thanks to the the ESP8266. I used a 20Kg load cell, […]

This Instructable describes the construction of an electronic archery arrow spine tester. An arrow spine tester measures the stiffness of arrows. This helps an archer to construct arrows of uniform specifications which will shoot consistently. Traditional arrow spine testers measure arrow stiffness, or spine, by hanging weights on the arrows and measuring the resultant sag […]

When I was working on the Toy Magnetic Levitation project with a solenoid coil, I thought to myself, why didn’t I make a coil winder. So I took my times to build a simple coil winder based on GRBL firmware and it was made from PVC pipes. I’m willing to share how I made it, please check […]

https://www.instructables.com/Xyluino-an-Arduino-Driven-MIDI-Marimba-Xylophone-G/#:~:text=My%20son%20starts,midi%20sound%20processor. Supplies What you need: an arduino, I use an arduino Uno, Rev. 3 analog multiplexer, 74HC4067 piezos, diameter about 3cm wood, bleech wood for the plates knowledge how to solder some electronic parts, wires, buttons, a display, midi socket Step 1: Collect Information, Test the Basics This step is just for your information and […]

You could always see 7-segment displays around you used to display digits, like in timer, clock, etc. In this mission, you are going to learn how it works and display numbers on it. Let’s start. Step 1: What You Will Need The parts you will need are all included in this Maker kit. SwiftIO board Shield […]

A great introductory project for those diving into the IoT and Arduino platform. Working with motors and an IR sensor helps newbies understand various components and sensors compatible with the Arduino. Using the remote control, you will be able to control the robot’s movement allowing the robot to move in straight lines or turn based […]