ABUSED HARD DRIVE BECOMES POV CLOCK




We all know that there’s not much to do with an old hard drive. Once you render the platters unreadable and perhaps harvest those powerful magnets, there’s not much left of interest. Unless, of course, you turn the whole thing into a persistence-of-vision clock.

At least that’s what [Leo] did when he created “PendoLux”. The clock itself is pretty simple; like any POV project, it just requires a way to move an array of flashing LEDs back and forth rapidly enough that they can trick the eye into seeing a solid image. [Leo] put the read head mechanism of an old HDD into use for that, after stripping the platters and motor out of it first.




The voice coil and magnet of the head arm are left intact, while a 3D-printed arm carrying seven RGB LEDs replaces the old heads. [Leo] added a small spring to return the arm to a neutral position, and used an Arduino to drive the coil and flash the LEDs. Getting the timing just right was a matter of trial and error; he also needed to eschew the standard LED libraries because of his heavy use of interrupts and used direct addressing instead.

POV clocks may have dropped out of style lately — this hard drive POV clock and a CD-ROM version were posted years ago. But [Leo]’s clock is pretty good looking even for a work in progress, so maybe the style will be making a comeback.

Source: ABUSED HARD DRIVE BECOMES POV CLOCK




Leave a Comment

*
= 4 + 2

(Spamcheck Enabled)

Read previous post:
Using the 433MHz RF Transmitter and Receiver with Arduino
Using the 433MHz RF Transmitter and Receiver with Arduino

Introduction While building microcontroller based projects, there are occasions where communication will be required between two devices, either in a...

Close
Scroll to top