About: Ibrar Ayyub

In this post I will discuss about the detailed ARDUINO MEGA FOR BEGINNERS. In the previous post I have discussed about brief introduction of the Arduino MEGA there I have discussed about the Arduino MEGA board, specifications of the Arduino UNO, microcontroller IC on which Arduino UNO is based, applications of the Arduino UNO and the programming of the Arduino […]

In this lesson(Nokia Library For Proteus), I will show you how to build a simple Graphical User Interface with the help of the Nokia 3310 LCD. I will design a Nokia 3310 Menu interface with the used of Arduino. Nokia Library For Proteus  Nokia 3310 LCD is a Graphical LCD device where we can manage […]

Every now and then you might be interested to input text to your arduino project. You can do it using Serial input but this would require Arduino to be always connected to a computer. In this tutorial I would show you how to implement text input using the small OLED display and 5 key keyboard […]

So first off , I am a student and wanted to pick an instrument , but the problem was that I was not sure that “would I be able to do it ?”. So, I thought to clear my base first and got an Idea to make a Piano using Arduino. This piano is a […]

This project consists of an interactive Arduino-based Halloween decoration referring to a witch cauldron. As you position your face in front of the cauldron and you get close, the eyes start moving around. At the same time, when there is very low light in the room the program turns on a LED light located in […]

This is year halloween project of me for my kid. This mask can react with scary sound and led when they wave their hands. Step 1: Preparing Stuffs 1. Arduino Pro Mini 5V 2. Module Mp3 DY-SV5W with SD card 3. 5W 4Ohm Speaker 4. LED WS2812 5. Infrared Sensor Module 6. A Halloween Mask […]

This is the first bicycle accessory gadget I made with Arduino. It’s a pattern-based backlight attached to the back-bag mounted on the bicycle luggage compartment. I’m riding an electric bicycle which can speed up around 24km/h at maximum. But I had fallen already three times and one of the incidents makes me go to the […]

Have you ever felt like not wanting to celebrate Halloween? Or too lazy to open the door and hear “trick or treat” a thousand times? Well, if that’s you, we offer the perfect solution without losing the spirit! This project is an automatic machine that works as a candy dispenser by detecting when a hand […]

If you haven’t already, check out the Leader-Follower Robot project (https://www.instructables.com/Leader-Follower-Robot-Legs/). The Leader-Follower Robot project provides important background on the concepts covered in this tutorial. We will also be using the Leader-Follower Robot to showcase some cool sensors! This Instructable will be a deeper dive into many of the sensors you can use to add […]

This is a bicycle journey recording device utilizing Arduino and a GPS module. I’m riding an electrical bicycle from time to time during weekends. Several good bicycle riding routes which pass by the lakes and parks are located near to my house. Therefore, bicycle riding become a favorite personal pastime recently. For planning the next […]