Posts by Ibrar Ayyub:
Arduino Based Auto Timer
Posted on: 01 Apr 2013
The Need: Last week around at work I had another usual un-usual problem to face with. Having to make lots of mechanisms n components to work with-in seconds or fracs at times I kind-of knew this was always coming. And invariably so my poor mind couldn’t think of anything but Arduino for a handy […]
Arduino camera Lens Controller
Posted on: 01 Apr 2013
My Lumix GH2 Micro Four Thirds camera not only shoots fantastic high definition videos, but with inexpensive adapters I can use it with older manual lenses that are cheap and often very high quality. I shoot a lot of performance videos for my daughter’s dance studio, and I use an f3.5 Nikon 28-85mm zoom lens because it provides a […]
4x4x4 RGB LED Cube using Arduino
Posted on: 01 Apr 2013
A while ago, when I first started using Arduino, my first project was a 4x4x4 LED cube, I built it from a Guide I found here in Instructables, I didn’t know anything about programming, and little about electronics, yet I was able to build it and make it work, I didn’t know how it worked […]
Model Police Car using an Arduino
Posted on: 01 Apr 2013
We wanted to build a model police car with working lights and sirens. Then we decided to add a motor and instead of using a switch to turn everything and off we used a photodiode. For our car the photodiode signal is a simple on off switch. If you want a more complicated device that will […]
Pressure Activated Light-Up Umbrella using an Arduino
Posted on: 01 Apr 2013
Once upon a time, 2 girls greatly enjoyed walking in the rain with umbrellas. They decided the enjoyment of this experience could be maximized by building their own pressure-activated web of LEDs to install under their umbrella. Thus, with the help of an Arduino, some 4051 multiplexers, a lot of wire and a lot of […]
Garduino-Automated Gardening System using Arduino
Posted on: 01 Apr 2013
This instructable is a guide for setting up an automated gardening system using an arduino and other cheap electronic parts. It allows sustainable gardening by using sensors to determine soil moisture, as well as a webscraper to determine future weather. It uses this information to save water by only using the requisite amount. Requirements for this project include experience soldering, […]
Arduino Skateboard Speedometer
Posted on: 01 Apr 2013
Using an Arduino, it is easy to make a speedometer/tachometer for virtually any man-powered vehicle. I made one for my skateboard that used a small magnet to count revolutions and utilized an LCD display screen. This Instructable will show you how you can do the same step by step. You will need a few things […]
How to make your own Arduino board
Posted on: 01 Apr 2013
If your are like me which I am guessing you are, then ever since you got into doing stuff with arduino you have wanted to make your own arduino board. You may be surprised to find out that making the prototyping board is actually very easy, and can have several advantages over using the commercially […]
Carduino- A simple Arduino robotics platform with its own library
Posted on: 01 Apr 2013
This is, as the title says, an Arduino-based robotics platform, with its own library. The “standard” model comes with two back motors, two omni-wheels in the front, and a distance sensor mounted on the front. It also has breadboard space on top for adding whatever you want. It is intended to be autonomous, but one […]
Building a semi Smart, DIY boat with Arduino and some other sensors
Posted on: 30 Mar 2013
I based this off of this really nice instructables.com post for building a water bottle boat, with some additions for obstacle avoidance and light-guided control. I used Arduino as a microcontroller, an ultrasonic sensor in the front, a few simple switches on the side of the boat, and a few light sensors on either side. See here for a […]
